Figure 17 Placing The Troubleshooting Rear Housing On The Console Front Housing - Motorola Astro XTS Instruction Manual

Fig17

Figure 17 Placing the Troubleshooting Rear Housing on the Console Front Housing

11. Slide the radio into the pocket until it bottoms out.
12. Push down on the pocket actuator until the radio is securely
latched in the console.
13. Lay down the front cover/chassis assembly and make sure the VA
is arranged on the bench so that the back cover/PCB assembly is
to the left and the front cover/chassis assembly is on the right
with the chassis facing upwards.
14. Plug the db25 end of cable into the db25 port on the back
housing/PCB assembly.
Note: Be extremely careful while performing the next step.
Flexible circuit boards and ZIF connectors are easily
damaged if mishandled.
15. Carefully grasp the free end of flex Extender and insert into the
ZIF connector on the PCB. Secure the flex circuit ribbon end by
pushing down on the ZIF connector frame, as shown in Figure 18.
16. Turn on the radio; turn on the power supply.
17. Begin troubleshooting.
VA Front Cover
Troubleshooting
Rear Housing
39