Microphone Bracket
Installation
2
Groove
DASH
MOUNT
OR
FLOOR
MOUNT
2
Figure 1 Console Installation Detail
Note: The microphone bracket should be mounted on a
substantial structure. Otherwise, repeated insertion and
removal of the microphone could loosen it.
Referring to Figure 2, use the microphone bracket as a template and
drill two 1/8-inch (0.32cm) holes. Attach the microphone bracket to
the mounting surface with the two self-tapping screws provided. Be
sure to leave sufficient room above the bracket for inserting and
removing the microphone.
0.125'' (0.3175cm)
Dia. Holes
1
Plastic
Guides
1
LEGEND:
1. No.10-12 x 1-1/4'' Self-Drilling, Self-Tapping
Screw (Quantity 4)
2. Allen Screw (Quantity 2)
Cut-Away of Dash
Trunnion Bracket
(Optional)
Console
Trunnion Bracket
(Optional)
9