Making Multiple Copies; Tray Use For Copy Mode; Cancel Copying - Savin SPC210SF User Manual

Making multiple copies

Press (Copy) to illuminate it in
blue.
Load your document.
Use the dial pad to enter the number of
copies you want (up to 99).
Press Black Start or Color Start.
Note
To sort the copies, press Options and ▲ or ▼
to select Stack/Sort . (See Sorting copies
using the ADF on page 11-7.)

Tray Use for Copy mode

If your machine does not have the optional
Tray#2, this setting is not available. You can
change the tray that will be used for next copy
only. Normally, the machine uses the paper in
Tray#1 first.
Press (Copy) to illuminate it in
blue.
Load your document.
Use the dial pad to enter the number of
copies you want (up to 99).
Press Options and ▲ or ▼ to select
Tray Select .
Press ▲ or ▼ to select Auto , #1(xxx)
or #2(xxx) .
Press Menu/Set.
The 'xxx' is the paper size detected by the
tray or the small size you set in the
Menu/Set, 1, 3.
Press Black Start or Color Start.
■
If both trays are using paper that is the
same size, Auto will allow your machine to
take paper from Tray #2 if Tray #1 is out of
paper.
To change the default setting follow the
instructions below:
Auto allows your machine to choose the
paper from the optional Tray#2 when paper is
1
out in Tray#1 or when the size of the
document will fit best on the paper in Tray#2.
Press Menu/Set, 1, 9.
General Setup
9.Tray Use:Copy
Press ▲ or ▼ to select Tray#1 Only ,
Tray#2 Only or Auto .
Press Menu/Set.
Press Stop/Exit.
Note
1
Copies will automatically be printed from
Tray#2 only if the Paper in Tray#1 was the
same size.

Cancel copying

To stop copying, press Stop/Exit.
Making copies
11
11 - 2