Savin 2212 Copy Reference Manual page 143

Copying
E E E E
Press the [User Stamp] key.
2
F F F F
Press the [Program/Delete Stamp]
key.
To program the User Stamp
A A A A Press the [Program] key.
B B B B Press the stamp number (1 – 4)
you want to program.
Note
❒ Stamp numbers with
ready have settings in them.
❒ If the stamp number is al-
ready being used, the ma-
chine will ask you if you
wish to overwrite it — Press
the [Yes] or [No] key.
132
C C C C Enter the user stamp name with
the letter keys on the display
panel.
Note
❒ You can register up to 10
characters.
Reference
For details on entering char-
acters, refer to "Entering Text
Characters" in the System
Settings manual.
D D D D Press the [OK] key.
E E E E Enter the horizontal size of the
stamp with the number keys,
and then press the [#] key.
Note
❒ You can enter sizes within the
horizont al range of 1 0 –
432mm, 1.0" – 17.0", and the
m al-
vertical range of 10 – 297mm,
1.0" – 11.7". However, if the
area exceeds the maximum
value (5,000mm
it is corrected to within the ac-
ceptable range automatically.
❒ To change the value entered,
press the [Clear] or
key and enter the new value.
2 2
, 7.75 inch ),
{ { { { Clear/Stop } } } }