QSC TouchMix Series Quick Start Manual page 3

Setting up the TouchMix-30 Pro with a DAW
DAW software settings
With the Windows driver installed and the computer connected to the mixer, your DAW program remains to be configured. Each DAW program will have its own unique
procedure, typically of three or four steps, which will set these configurations:
• Designate the TouchMix-30 Pro as the audio source for the DAW.
• Set the number of mixer inputs and outputs to be used by the DAW program.
• For recording, assign mixer inputs to DAW tracks.
• For mixing down, assign DAW tracks to mixer inputs.
This following pages of this Quick Start Guide have procedures for four popular DAW programs: Apple Logic Pro X, Steinberg Cubase, Pro Tools 12.5, and Apple
GarageBand 10. See your DAW software's user documentation for any specific details. If your DAW does not recognize the mixer, it may be necessary to turn the mixer
off and on again or to restart your computer.
Apple Logic Pro X
1. Open Logic Pro X.
2. To select the TouchMix-30 Pro as the audio device, go to Preferences >
3. Close Preferences.
4. To assign TouchMix-30 Pro inputs to Logic Pro X, go to File > New.
5. For Track type, select Audio.
6. For Number of tracks, enter 32.
— Figure 8 —–
7. With these default settings, the mixer inputs will map one-to-one with the
8. Click Create.
— Figure 9 —–
3
Audio. Click Devices. At Output Devices, select QSC TM30 Pro (Figure 4).
Do the same at Input Devices (Figure 4).
DAW buses. For more advanced settings, click Details (Figure 5). The options
offered include shifting mapping to different input and output channels;
ascending channel numbering for inputs and outputs; opening the library for
inputs; adjusting monitoring configurations.
macOS