Loading Labels; Continuous Mode - SATO MB400 User Manual

Before Starting

Loading Labels

[Continuous Mode]

(5) After peeling the lead tape on the roll,
take the leading edge of the first label on
the roll and pull it out via the platen
roller. Then turn the front cover in the
direction of the arrow.
(6) Close the front cover in the direction
of the arrow.
* Press the front cover until the cover
Open/Close lever clicks.
If the cover is not properly
locked, the warning label in
the front cover Open/Close
lever can be seen.
* Never print with the cover
not properly locked.
Page 22
... The method of loading the labels may vary depending
on the print mode.
(Continued from page 21)
Front cover Open/
Close lever
Locked
Warning label
Not locked
PN9001114