Loading Labels Or Tags - SATO M8400RVe Operation Manual

Hide thumbs Also See for M8400RVe:

Table of Contents

Operation Manual

4.2 Loading Labels or Tags

Step 1 Open the side access door by swinging it to the rear of the

printer. Open the top access door by swinging it up and to

the left.

Step 2 Open the print head assembly by pushing the head latch

toward the rear of the printer. The print head assembly is

spring-loaded and will automatically open as soon as the

head latch is disengaged.

Head Latch

Step 3 Loosen the label edge guide and push it to the outside of

the printer to give the maximum label width. Remove the

label roll retainer.

Step 4 If using roll labels or tags, load the roll onto the label supply

spindle so that the printing side of the labels faces

upwards as it unwinds from the roll. The labels should be

wound face-in.

Label Hold

Down

Label Guide

M8400RVe

4. Media Loading

Label Roll

Retainer

Label Edge Guide

Label Roll

Retainer

Label

Supply

Spindle

Table of Contents