Battery Power Level Indicator; Battery Voltage Drop - Denso BHT-1361QWB-CE Hardware User Manual

Barcode / 2d code handy terminal
Hide thumbs Also See for BHT-1361QWB-CE:
Table of Contents

Advertisement

2.2.1 Battery Power Level Indicator

About the Battery Level
 The battery power level indicator is used as a rough estimate of the remaining power.
Use this indicator as a gu
 The battery power level w
voltage may differ from the battery power level indicator.
 Be sure to c
harge the battery promptly before the battery power runs out.
2.2.2

Battery Voltage Drop

The message on the right shows up for approximately 2 seconds and the beeper
sounds three times when the battery voltage drops to a level that
or battery replacement.
The message and beeper are briefly indicated to alert you only o
pressed or the touch screen is tapped while using the BHT. Then
normal operation. Replace or charge the battery promptly.
If the BHT is left without charging the battery, the BHT
automatically and data including files and settings stored in the
If the BHT is
used without charging or replacing the battery after the above
message is shown, the battery voltage drops to a level that stops the BHT operation.
Then the screen on the right shows up, the beeper sounds five times, and the power
automatically turns OFF. (Depending on the battery level, this message may not
show up or the beeper may not sound five times.)
Replace or charge the battery immediately when this message shows up.
If the BHT is left without charging the battery, the BHT may perform full-reset
automatically and data including files and settings stored in the RAM may be lost.
Refer to "Chapter 2 BHT Preparation" – "2.6.5 Memory Contents after Reset/Full
Reset" for the details.
Barcode / 2D Code Handy Terminal
The battery power level can be checked with the
level indicator) shown in the taskbar. The icon shows th
levels.
These levels are only a roug
the battery before running out of power.
:The battery power is full.
: The battery power is partially used. C
: The battery power is low and should
: The battery power is completely gone.
Charge immediately or replace w
Note: The taskbar in this manual varies from the actu
ideline.
ill vary depending on BHT operation, therefore the actual battery
h estimate of battery power, make sure to charge
harging sooner is better.
be charged immediately.
ith a fully charged battery.
al BHT LCD screen.
requires charging
nce when a key is
the BHT returns to
may perform full-reset
RAM may be lost.
icon (battery power
e battery power in four
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bht-1361q-ceBht-1361bwb-ceBht-1361b-ce

Table of Contents