Installing power connector port
1
Install the power connector port into the slot on the computer.
2
Place the metal bracket on the power connector port.
3
Tighten the M2.0x3.0 screw to secure the power connector port to the computer.
4
Connect the power connector port cable to the connector on the system board.
5
Install the :
a
battery
b
base cover
6
Follow the procedure in
LED board
Removing LED board
1
Follow the procedure in
2
Remove the :
a
base cover
b
battery
3
To remove the LED board:
a
Disconnect the LED cable from the LED board [1].
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
23