b
battery
3
To remove the WLAN card:
a
Remove the M2.0 x 3.0 screw that secures the metal bracket to the WLAN card [1].
b Lift the metal bracket [2].
c
Disconnect the WLAN cables from the connectors on the WLAN card [3].
d Remove the WLAN card from the computer [4].
NOTE:
Ensure NOT to pull the WLAN card more than 35°, to avoid damage to pin.
Installing WLAN card
1
Insert the WLAN card into the connector on the system board.
2
Connect the WLAN cables to the connectors on the WLAN card.
3
Place the metal bracket and tighten the M2.0 x 3.0 screw to secure it to the computer.
4
Install the .:
a
battery
b
base cover
5
Follow the procedure in
After working inside your
computer.
Disassembly and reassembly
19