Installing Led Board; Smart Card Module; Removing Smart Card Cage - Dell Latitude 7280 Owner's Manual

CAUTION:
the LED cable from its connector.
b Unroute the LED cable from the routing channel [2].
c Remove the M2.0 x 2.5 screw that secures the LED board to the computer [3]
d Lift the LED board from the computer [4].

Installing LED board

1 Insert the LED board into the slot on the computer.
2 Tighten the M2.0 x 2.5 screw to secure the LED board.
3 Route the LED cable through the routing channel.
4 Connect the LED cable to the system board.
5 Install the :
a battery
b base cover
6 Follow the procedure in

Smart card module

Removing smart card cage

1 Follow the procedure in
2 Remove the:
24 Disassembly and reassembly
Avoid pulling the cable as it would result in breaking the cable connector. Instead, use a scribe to release
After working inside your
Before working inside your
computer.
computer.