Installing Battery; Pcie Solid State Drive (Ssd); Removing Pcie Ssd - Dell Latitude 7280 Owner's Manual

Installing battery

1 Insert the battery into the slot on the computer.
2 Route the battery cable through the routing clip and connect the battery cable to the connector on the system board.
NOTE: Route the battery cable, if the cable at the base of the battery is un routed.
3 Tighten the M2.0 x 5.0 screws to secure the battery to the computer.
NOTE: A small battery (3-cell) has a single screw, a larger battery (4-cell) has two screws.
4 Install the base cover
5 Follow the procedure in

PCIe Solid State Drive (SSD)

Removing PCIe SSD

1 Follow the procedure in
2 Remove the :
a base cover
b battery
3 To remove the PCIe SSD:
a Loosen the M2 x3 captive screw that secure the SSD bracket [1].
b Remove the SSD bracket [2].
c Remove the PCIe SSD from the connector on the system board [3].
After working inside your computer.
Before working inside your computer.
Disassembly and reassembly 13