Britax CLICKTIGHT PINNACLE User Manual page 19

Britax Child Safety, Inc.
7� Fasten the chest clip�
NOTE: Push together until
a click is heard�
8� Fasten the harness buckle�
9� Pull the adjuster strap to
tighten the harness�
NOTE: Pull the harness
adjuster away from the
child seat (parallel to the
ground) to tighten.
Harness to Booster Mode: Removing the Harness and
Buckle
1� Loosen the harness
completely�
a� Press release lever�
b� Pull both harness
straps forward�
2� Unhook the harness straps
from the yoke�
NOTE: Store the yoke in a
secure place in the base.
3� Pull the harness straps out
of the slots�
32 32
FRONTIER/PINNACLE CLICKTIGHT User Guide
4� Open the CLICKTIGHT�
a� Locate the two slots
in the CLICKTIGHT
cover�
b� Squeeze the
CLICKTIGHT release
levers�
5� Unhook the harness straps
from the CLICKTIGHT hip
anchors�
6� Unhook the retaining clips
at the back of the seat
cover� Pull the seat cover
forward and over the belly
pad
7� Turn and pull the buckle
retainer through the slot in
the child seat shell�
Booster to Harness Mode: Replacing the Harness and
Buckle
1� Open the CLICKTIGHT�
a� Locate the two slots
in the CLICKTIGHT
cover�
b� Squeeze the
CLICKTIGHT release
levers�
2� Unhook the retaining clips
at the back of the seat
cover� Pull the seat cover
and foam insert forward�
NOTE: Choose the slot
that is closest to, but not
under your child.
33 33