Booster Mode - Britax CLICKTIGHT PINNACLE User Manual

Britax Child Safety, Inc.

Booster Mode

WARNING!
Only use a lap-shoulder belt to secure the child in booster
mode�
Use the shoulder belt guides on the child seat to ensure
proper fit�
Ensure the lap part of the vehicle belt sits low across the
child's upper thighs and that the shoulder part does not
contact the child's neck�
Before you begin:
• If your vehicle seat back is adjustable, ensure it is in
the upright position before placing the child seat on
the vehicle seat�
• Adjust the child seat to the upright position and place
forward facing on the vehicle seat, if not already
installed (see page 8)�
1� Adjust the head restraint
so the bottom of the
shoulder belt guides are
in the closest position
at or above the child's
shoulders� The child's ears
should be below the top of
the head restraint�
2� Pull the vehicle belt out
and route the shoulder part
through the shoulder belt
guide�
NOTE: Raising the head
restraint to the highest
position will allow for
easier access to the
shoulder belt guide.
3� Fasten the vehicle belt
across the child�
NOTE: The lap part of the
vehicle belt must be routed
low across the child's
upper thighs.
20
FRONTIER/PINNACLE CLICKTIGHT User Guide
4� Remove slack from the
vehicle belt�
NOTE: The shoulder part
must lie across the center
of the child's chest, at or
above the child's shoulder.
Before traveling, verify that the:
9 Vehicle belt is not twisted�
9 Buckle does not rest on red belt guide�
9 Shoulder part of vehicle belt is routed through the
shoulder belt guide at or above the child's shoulder,
lies across the center of the child's chest and does
not contact the child's neck�
9 Lap part of the vehicle belt is routed low across the
child's upper thighs�
21