Download Print this page

Britax STEELCRAFT Y-835 SERIES Use

4 in 1 portable cot

Advertisement

Quick Links

4 IN 1 PORTABLE COT
BEFORE ASSEMBLING THIS COT READ AND UNDERSTAND THE INSTRUCTIONS.
• Do not use mattress other than the one supplied by the manufacturer.
Incorrect mattress can cause death.
• Use only accessories as recommended by the manufacturers.
• Ensure the top rails and base are fully locked.
• Stop using this cot if any part of the cot is broken, torn or missing.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
www.britax.com.au
SeriesY-835

Advertisement

loading

Summary of Contents for Britax STEELCRAFT Y-835 SERIES

  • Page 1 • Use only accessories as recommended by the manufacturers. • Ensure the top rails and base are fully locked. • Stop using this cot if any part of the cot is broken, torn or missing. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE. www.britax.com.au SeriesY-835...
  • Page 2 WARNINGS ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS. READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE OF THIS COT. THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS ESSENTIAL. WARNINGS: TO AVOID INJURY OR DEATH: • FOLLOW THE MANUFACTURERS INSTRUCTIONS. • MAKE SURE CHILDREN ARE KEPT AWAY WHILE YOU ARE ASSEMBLING/ DISASSEMBLING THE COT.
  • Page 3 WARNINGS WARNINGS • Do not use your cot if any part is torn, broken or missing. • Do not place toys or other objects in the cot which could provide a step or foothold to help the child climb out. •...
  • Page 4: Parts List

    WARNINGS WARNING: MATTRESS SIZE Using the wrong size mattress may create hazardous gaps that could result in suffocation or could reduce the side height of the cot which may result in your child falling out from the cot. IMPORTANT To ensure the cots correct assembly and use, ensure you follow these instructions in the order they are written.
  • Page 5 PARTS LIST D 1 x Cot C 6 Mattress Support Rods F 1 x Change Table E 1 x Bassinet G 1 x Toy Mobile Stand & 3 Soft Toys (4 in 1 model only)
  • Page 6 1. TO OPEN THE COT IMPORTANT: THESE STEPS WILL ENSURE THAT THE COT IS CORRECTLY OPENED AND READY TO USE. A Unzip the carry bag and remove the cot. B Stand the cot on its feet and undo the hook & loop straps that hold the mattress around the frame.
  • Page 7 1. TO OPEN THE COT CAUTION: TAKE CARE, AS FINGER PINCHING CAN OCCUR IN THE CORNER WHEN LOCKING THE RAILS IN PLACE. E Starting with the short rails, pull the centre up with both hands quickly until they are locked in place. F Now do the same with the longer rails.
  • Page 8 1. TO OPEN THE COT H Place the mattress into the cot with its padded side facing up. I Secure the mattress to the cot by passing the loop straps through the slots in the cot base and pressing it onto the hook attachment strips, sewn to the underside of the cot base.
  • Page 9 A Push the brake lever down to lock, or lift the brake lever up to unlock. PLEASE NOTE: Always apply the brakes wherever and whenever you are using the cot. 3. TO FOLD THE COT IMPORTANT: THESE STEPS MUST BE FOLLOWED IN THIS ORDER TO EASILY FOLD THE COT.
  • Page 10 3. TO FOLD THE COT E Take the mattress and wrap it around the folded cot with the padded side facing inwards. F Thread the straps through the plastic loops, pull them tight and secure using the hook and loop attachments. G Take the carry bag and cover the folded cot.
  • Page 11 4. TO USE THE BASSINET WARNINGS: TO PREVENT FALLS, THIS BASSINET SHOULD NOT BE USED ONCE A CHILD CAN SIT UP. NEVER PLACE A CHILD IN THE COT WHEN THE BASSINET IS IN PLACE. A Insert the 3, two piece support rods into bassinet inner sleeves separately and engage them in the middle with the locking pin.
  • Page 12 4. TO USE THE BASSINET PLEASE NOTE: Always secure the mattress before using the bassinet. IMPORTANT: ALWAYS REMOVE THE BASSINET BEFORE FOLDING THE PORTABLE COT.
  • Page 13 5. TO USE THE CHANGE TABLE WARNINGS: NEVER LEAVE YOUR CHILD UNATTENDED. TO PREVENT FALLS THE CHANGE TABLE SHOULD NOT BE USED ONCE A CHILD CAN SIT UP. NEVER PLACE A CHILD IN THE COT WHEN THE CHANGE TABLE IS IN PLACE. ALWAYS USE THE HARNESS WHEN USING THE CHANGE TABLE.
  • Page 14 5. TO USE THE CHANGE TABLE PLEASE NOTE: Make sure the four clamps are engaged on to the side rails.
  • Page 15 6. TO ASSEMBLE AND USE THE TOY MOBILE (4 in 1 Portable cot model only) WARNING: POSSIBLE ENTANGLEMENT INJURY: THIS MOBILE IS DESIGNED TO BE USED FROM BIRTH TO 5 MONTHS. A MOBILE IS INTENDED FOR VISUAL STIMULATION AND IS NOT INTENDED TO BE TOUCHED BY THE CHILD.
  • Page 16 6. TO ASSEMBLE AND USE THE TOY MOBILE B Insert the connector on the round music box into the hole on the mobile hanger and push until they lock together. C Snap the moulding on the top of the music box into the end of the upper curved arm.
  • Page 17 6. TO ASSEMBLE AND USE THE TOY MOBILE D Connect each of the three toys to the mobile tri-shaped hanger by threading the string into the slot at the end of each hanger arm. E The mobile can be fitted to the cot with or without the bassinet. To attach the mobile push the base of the mobile over any of the cot top rail centre joints.
  • Page 18 6. TO ASSEMBLE AND USE THE TOY MOBILE F To operate the music box turn the winder on the back of the box clockwise.
  • Page 19: Care And Maintenance

    CARE & MAINTENANCE • To prolong the life of your cot keep it clean and do not leave it in the direct sunlight for extended periods of time. • Removable fabric covers and trims may be cleaned using warm water with a household soap or mild detergent.
  • Page 20 CUSTOMER SERVICE 1300 303 330 - Australia 0508 688 822 - New Zealand Due to our continuing program of development, Britax reserves the right to alter the specifications, color or design without any further notice. The Steelcraft trademark is the property of Britax Childcare Pty.Ltd - Australia.