Britax CLICKTIGHT PINNACLE User Manual page 18

Britax Child Safety, Inc.
6� Lay the EZ-Buckle belly
pad forward and position
on top of the harness
adjuster release lever�
7� Place the seat cover and
foam back in their original
position and attach the
retaining clips�
8� Close the CLICKTIGHT�
A click confirms the
CLICKTIGHT is secure�
9� Raise the head restraint to
the highest position�
10� Tuck each harness strap
under the side wing
covers�
a� Fold the harness
straps to remove any
additional slack before
tucking underneath the
bib�
b� Slide the comfort
pads, chest pads,
chest clip and buckle
tongues to the top
of the harness strap
before folding�
11� Tuck the harness straps
behind the head restraint
bib�
30 30
TRUE SIDE IMPACT
PROTECTION
FRONTIER/PINNACLE CLICKTIGHT User Guide
Booster to Harness Mode: Restoring the Harness and
Buckle
1� Open the CLICKTIGHT�
a� Locate the two slots
in the CLICKTIGHT
cover�
b� Squeeze the
CLICKTIGHT release
levers�
2� Unhook the retaining clips
at the back of the seat
cover� Pull the seat cover
and foam insert forward�
3� Pull the EZ-Buckle belly
pad through the slot in the
seat cover�
NOTE: Choose the slot
that is closest to, but not
under your child.
4� Place the seat cover and
foam insert back to their
original position and attach
the retaining clips�
5� Close the CLICKTIGHT�
A click confirms the
CLICKTIGHT is secure�
6� Remove the harness
straps from behind the
side wing covers�
31 31