Britax ISOFIX COMPATIBLE Instruction Manual
  1. Manuals
  2. Brands
  3. Britax Manuals
  4. Baby & Toddler Furniture
  5. ISOFIX COMPATIBLE
  6. Instruction manual
Britax ISOFIX COMPATIBLE Instruction Manual

Britax ISOFIX COMPATIBLE Instruction Manual

Convertible child seat
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
CONVERTIBLE CHILD SEAT
ISOFIX COMPATIBLE
Series No. BS3800A-i20133
IMPORTANT: KEEP THIS BOOKLET IN THE PLACE PROVIDED
ON THE CHILD RESTRAINT
Birth to 2-3 years (approx) REARWARD FACING
12 months to 4 years (approx) FORWARD FACING
Instructions for Installation & Use
1

Advertisement

Table of Contents
loading

Related Manuals for Britax ISOFIX COMPATIBLE

Summary of Contents for Britax ISOFIX COMPATIBLE

  • Page 1 INSTRUCTION MANUAL CONVERTIBLE CHILD SEAT Birth to 2-3 years (approx) REARWARD FACING ISOFIX COMPATIBLE 12 months to 4 years (approx) FORWARD FACING Series No. BS3800A-i20133 IMPORTANT: KEEP THIS BOOKLET IN THE PLACE PROVIDED ON THE CHILD RESTRAINT Instructions for Installation & Use...

  • Page 2: Table Of Contents

    CONTENTS QUICK START GUIDE - a shortened version of the manual • REARWARD FACING SEATBELT • REARWARD FACING ISOFLEX ® • FORWARD FACING SEATBELT • FORWARD FACING ISOFLEX ® MEET YOUR CHILD SEAT IMPORTANT INFORMATION AND WARNINGS SHOULDER HEIGHT MARKERS OUTGROWN YOUR CHILD SEAT CHILD SEAT SUITABILITY GUIDE REARWARD FACING...
  • Page 3 CONTENTS FORWARD FACING CHILD SEAT FEATURES - FORWARD FACING SET UP • GENERAL INFORMATION • FORWARD FACING RECLINE POSITIONS Scan QR code • INSTALLING INTO YOUR VEHICLE for forward • SEATBELT FOR FORWARD FACING facing seatbelt installation video. • ISOFLEX FOR FORWARD FACING ®...

  • Page 4: Rearward Facing Seatbelt

    QUICK START GUIDE - REARWARD FACING SEATBELT Hey, before you install me! Don't forget to note your serial number found on the seat to complete your warranty registration. Press Remove infant insert Pull Press Check angle Lift up middle cover NO TWISTS Engage buckle...
  • Page 5 QUICK START GUIDE - REARWARD FACING SEATBELT Replace middle cover Lengthen Top Tether Pull Push down Pull Remove slack Push Replace infant insert NO TWISTS NO SLACK Pull to tighten Attach tether Store clip strap Deploy SICT Lift headrest adjuster Harness Straps not below...

  • Page 6: Rearward Facing Isoflex

    QUICK START GUIDE - REARWARD FACING ISOFLEX ® Hey, before you install me! Don't forget to note your serial number found on the seat to complete your warranty registration. Press Unhook clip on cover ISOFIX Push button and de-latch Press to Push down lengthen Connect...
  • Page 7 QUICK START GUIDE - REARWARD FACING ISOFLEX ® NO TWISTS Hook clip on cover NO SLACK Attach Pull to tighten tether clip Lift headrest adjuster Deploy SICT Store strap Engage Tongues Harness Straps not below green zone Pull ALWAYS ENSURE: BUCKLE IS SECURE.

  • Page 8: Forward Facing Seatbelt

    QUICK START GUIDE - FORWARD FACING SEATBELT Hey, before you install me! Don't forget to note your serial number found on the seat to complete your warranty registration. Press Fit firmly to car seat Engage Behind Harness buckle Push Lengthen Top Tether Under down Pull...
  • Page 9 QUICK START GUIDE - FORWARD FACING SEATBELT Deploy SICT Lift headrest adjuster Press Harness Straps not below green zone Engage Tongues Pull ALWAYS ENSURE: BUCKLE IS SECURE. REMOVE SLACK AND TWISTS FROM HARNESS AND TOP TETHER. Instructions for Installation & Use...

  • Page 10: Forward Facing Isoflex

    QUICK START GUIDE - FORWARD FACING ISOFLEX ® Hey, before you install me! Don't forget to note your serial number found on the seat to complete your warranty registration. Press Unhook clip on trim ISOFIX Push button and de-latch Push down Press to lengthen Remove...
  • Page 11 QUICK START GUIDE - FORWARD FACING ISOFLEX ® Press NO SLACK Pull to tighten Store strap Lift headrest adjuster Deploy SICT Harness Straps not below green zone ALWAYS ENSURE: BUCKLE IS SECURE. REMOVE SLACK AND TWISTS FROM HARNESS AND TOP TETHER.

  • Page 12: Meet Your Child Seat

    To ensure that your child gets all the protection designed into the restraint PLEASE READ AND FOLLOW THESE INSTRUCTIONS EXACTLY and use only Britax Safe-n-Sound ® recommended parts and accessories.
  • Page 13 MEET YOUR CHILD SEAT ISOFIX COMPATIBLE There will be straps fitted to each side of the lower part of the seat. Britax flexible strap ® ISOFIX Compatible connector technology is known as ISOFLEX ® WHAT ARE ISOFIX LOW ANCHORAGES IN A VEHICLE? ISOFIX low anchorages are fixed, standardised anchoring points for securely installing an ISOFIX compatible child restraint in a vehicle fitted with ISOFIX low anchorages.

  • Page 14: Important Information And Warnings

    IMPORTANT INFORMATION AND WARNINGS • Fit the restraint firmly to the car seat. • Fit the harness firmly to the child. • A loose restraint or harness is dangerous. • Supervision of children is needed because they may be able to undo the buckles and adjusters.
  • Page 15 IMPORTANT INFORMATION AND WARNINGS IMPORTANT: TO BE USED WITH A LAP-SASH OR LAP-ONLY SEATBELT OR ISOFIX LOW ANCHORAGES IN THE BACK OF MOST CARS WITH FORWARD FACING SEATS. GENERAL • Do not attach the lower attachment connectors of two separate child restraints to the same ISOFIX low anchorages in your car.

  • Page 16: Shoulder Height Markers

    SHOULDER HEIGHT MARKERS Shoulder height markers are featured clearly on the child seat (as seen in diagram). The markers provide an indicator for when your child has outgrown the child's seat rearward or forward facing modes. Instructions for Installation & Use...
  • Page 17 Your child MUST be forward facing forward facing their shoulders are above the middle marker. Middle Height Marker Your child can be Britax ® rearward facing rearward facing recommends using this restraint OR forward facing forward facing in rearward if their shoulders are...
  • Page 18 SHOULDER HEIGHT MARKERS IMPORTANT: Follow this advice. Instructions for Installation & Use...
  • Page 19 SHOULDER HEIGHT MARKERS Child Use (Forward Facing) Upper Height Marker Middle Height Marker Older Baby (Rearward Facing) Older Baby (Forward Facing) Middle Height Marker Lower Height Marker Middle Height Marker Lower Height Marker Newborn (Rearward Facing) Lower Height Marker Instructions for Installation & Use...

  • Page 20: Outgrown Your Child Seat

    OUTGROWN YOUR CHILD SEAT When your child has outgrown this seat, you can use: • A harnessed child seat with in-built harness suitable for children approximately 6 months to 8 years old. • A convertible booster seat with in-built harness until approximately 4 years old and then as a booster seat with vehicle lap-sash seatbelt until approx 6 to 8 years of age (or seatbelt...

  • Page 21: Child Seat Suitability Guide

    CHILD SEAT SUITABILITY GUIDE CHILD SEAT SUITABILITY GUIDE These child restraints, when used correctly, allow the driver to meet the Australian Road Rules in each state. Instructions for Installation & Use...

  • Page 22: Child Seat Features - Rearward Facing

    CHILD SEAT FEATURES - REARWARD FACING Harness adjuster button located Under cover 8. Rebound Bar 1. Adjustable Headrest 9. Harness Adjuster Strap (Lower) 2. Shoulder Height Markers 10. Release Buckle (Red button) 3. Shoulder Pads 11. Buckle Tongue Holders 4. Infant Insert 12.
  • Page 23 CHILD SEAT FEATURES - REARWARD FACING ® ISOFLEX Connectors are stored on each side under the seat cover. 14. Vehicle's Anchor Fitting 22. FORWARD FACING BELT PATH (Yellow) 15. Attachment Clip 23. Tension Indicator (Green when activated) 16. Top Tether Adjuster Strap 24.

  • Page 24: General Information

    SETUP - GENERAL INFORMATION FOR REARWARD FACING CHILD SEAT UPPER ANCHORAGE POINT This child seat must be installed using the top tether. The top tether will need to attach to the appropriate upper anchorage point for both rearward and forward facing modes. Refer to the car owner's handbook for anchorage locations or points.

  • Page 25: Convert To Rearward Facing

    SETUP - CONVERT TO REARWARD FACING CONVERT TO REARWARD FACING MODE: To fully recline the child seat, Step 1. Move recline foot by pulling the recline foot handle and rotating to the rearward facing position until the foot locks into position. Step 2.

  • Page 26: Installing Into Your Vehicle

    SETUP - INSTALLING INTO YOUR VEHICLE SETUP - INSTALLING INTO YOUR VEHICLE FOR REARWARD FACING FOR REARWARD FACING Step 5. Press the harness adjuster button located under the trim. Press Pull Step 6. Place your hand under both shoulder harness straps, then pull shoulder harness straps to lengthen.
  • Page 27 SETUP - INSTALLING INTO YOUR VEHICLE FOR REARWARD FACING Do not have the seat too far away from the vehicle seat. Top tether behind the child seat Step 10. Allow top tether and clip to hang down from child seat until it is installed later. Instructions for Installation &...

  • Page 28: Recline Angle

    SETUP - RECLINE ANGLE FOR REARWARD FACING REARWARD FACING LEVEL INDICATOR: The Rearward Facing Level Indicator shows when your child seat is installed at the correct angle for your vehicle. It gives you confidence the child seat is positioned correctly whenever you travel.
  • Page 29 SETUP - RECLINE ANGLE FOR REARWARD FACING ANGULAR ADJUSTMENT OF CHILD SEAT Some vehicle seats have more rearward slope than others. The angle may be adjusted by placing a firm packing between the child seat and the underside of the base. Packing can be a firmly rolled up towel (see figure A).

  • Page 30: Seatbelt For Rearward Facing

    SETUP - SEATBELT FOR REARWARD FACING HOW TO INSTALL USING SEATBELT: Step 1. Remove infant insert (If fitted). IMPORTANT - Ensure buckle tongues are placed into buckle tongue holders prior to feeding through seatbelt. Step 2. Lift out middle cover. VEHICLE SEATBELT Step 3.
  • Page 31 SETUP - SEATBELT FOR REARWARD FACING Step 4. Feed vehicle seatbelt through blue REARWARD FACING BELT PATH guide. Step 5. Continue feeding vehicle seatbelt through opposite blue REARWARD FACING BELT PATH guide. Step 6. Engage the vehicle seatbelt buckle and tongue without twists. ENSURE THERE ARE NO TWISTS IN SEATBELT.
  • Page 32 SETUP - SEATBELT FOR REARWARD FACING Step 7. Now apply downward pressure onto Apply the inner seat and remove all the seat pressure belt slack by pulling the seat belt from the buckle side across the child seat and back into the retractor. Remove slack ALWAYS REMOVE SLACK FROM...
  • Page 33 SETUP - SEATBELT FOR REARWARD FACING Step 8. Re-check that the level indicator is still in the required range. Refer to page 28. Step 9. Refit middle cover and infant insert as required. You have now successfully completed the seat belt installation and are now ready to install the top tether.

  • Page 34: Isoflex ® For Rearward Facing

    SETUP - ISOFLEX FOR REARWARD FACING ® Please ensure you have followed the steps on pages 25 - 29 HOW TO INSTALL USING ISOFLEX ® Locate ISOFIX low anchors in the Step 1. Locate the ISOFIX Low Anchorages vehicle rear seat. in the vehicle rear seat.
  • Page 35 SETUP - ISOFLEX FOR REARWARD FACING ® Step 5. Connect the ISOFLEX connectors into ® each ISOFIX low anchorage. Give a firm tug on the connector to check it is securely fitted. Connectors may also show a green indicator on top.

  • Page 36: Top Tether For Rearward Facing

    SETUP - TOP TETHER FOR REARWARD FACING HOW TO INSTALL THE TOP TETHER Lengthen strap Step 1. Press top tether adjuster button. Step 2. Lengthen top tether strap fully, ensure all unnecessary twists are removed. Press Step 3. Place the top tether over the vehicle seatback, and if needed, remove the vehicle headrest.
  • Page 37 SETUP - TOP TETHER FOR REARWARD FACING IMPORTANT: The top tether strap must be fitted at all times. Always secure the loose end of the top tether strap to prevent it hanging out of the car or being accessible by the child. THIS RESTRAINT IS NOT SUITABLE FOR USE WHERE THE TOP TETHER STRAP MAY FALL INTO A SPLIT IN THE SEAT BACK OR OFF THE SIDE OF THE SEAT.
  • Page 38 SETUP - TOP TETHER FOR REARWARD FACING Step 6. Ensure slack is removed from the top tether straps by pulling top tether adjuster strap. Do not over tighten as it may cause your child seat to lift. ALWAYS REMOVE SLACK IN THE TOP TETHER AND STORE STRAP.

  • Page 39: Open Advanced Side Impact Cushion Technology

    SETUP - OPEN ADVANCED SIDE IMPACT CUSHION TECHNOLOGY FOR REARWARD FACING OPEN ADVANCED SIDE IMPACT CUSHION TECHNOLOGY: NOTE. The SICT™ system should not be used if the child seat is in the centre position. For further information on SICT™ refer to page 13. Step 1.

  • Page 40: Headrest And Shoulder Harness

    SETUP - HEADREST AND SHOULDER HARNESS FOR REARWARD FACING HOW TO USE - HEADREST AND SHOULDER HARNESS: Step 1. Press top tether adjuster button and Lengthen strap Step 2. Lengthen top tether strap fully (if desired). Press Step 3. Press harness adjuster button (located under trim.) Step 4.
  • Page 41 SETUP - HEADREST AND SHOULDER HARNESS FOR REARWARD FACING Step 7. Place buckle tongues into buckle tongue holders. Step 8. Place baby into the child seat. Ensure your baby is positioned with their back flat against the back rest and their bottom correctly positioned into the curved seat base.
  • Page 42 SETUP - HEADREST AND SHOULDER HARNESS FOR REARWARD FACING Step 10. Engage Buckle. ENSURE BUCKLE IS ALWAYS Tongue CONNECTED DURING USE. Buckle ENSURE ALL HARNESS STRAPS ARE NOT TWISTED. Shoulder Strap strap Step 11. Remove all slack from the lap strap area (including behind baby's bottom), by pulling up on the shoulder straps.

  • Page 43: Remove Child From Child Seat

    SETUP - REMOVE CHILD FROM CHILD SEAT FOR REARWARD FACING REMOVING CHILD FROM SEAT: Step 1. Press top tether adjuster button and Lengthen strap Step 2. Lengthen top tether strap fully. Press Step 3. Loosen shoulder harness straps by pressing the harness adjuster button (located under trim).

  • Page 44: Close Advanced Side Impact Cushion Technology

    SETUP - CLOSE ADVANCED SIDE IMPACT CUSHION TECHNOLOGY FOR REARWARD FACING CLOSE ADVANCED SIDE IMPACT CUSHION TECHNOLOGY: Step 1. Rotate clockwise to close. Instructions for Installation & Use...

  • Page 45: Remove Child Seat From Vehicle Seatbelt

    SETUP - REMOVE CHILD SEAT FROM VEHICLE FOR REARWARD FACING SEATBELT Please ensure you have followed the step 1 on page 44. REMOVING CHILD SEAT FROM Press VEHICLE: Step 1. Press top tether adjuster button and Step 2 . Lengthen top tether strap fully. Pull Lengthen strap Step 3.

  • Page 46: Remove Child Seat From Vehicle Isoflex

    SETUP - REMOVE CHILD SEAT FROM VEHICLE FOR REARWARD FACING ISOFLEX ® Please ensure you have followed the step 1 on page 44. REMOVING CHILD SEAT FROM VEHICLE: Press Step 1. Press top tether adjuster button and Step 2 . Lengthen top tether strap fully. Pull Lengthen strap Step 3.
  • Page 47 SETUP - REMOVE CHILD SEAT FROM VEHICLE FOR REARWARD FACING ISOFLEX ® Step 6. Adjust each ISOFLEX strap to the ® shortest length and engage each ISOFLEX connector onto its ® storage pin. Step 7. Pull trim over ISOFLEX connectors ®...

  • Page 48: Child Seat Features - Forward Facing

    CHILD SEAT FEATURES - FORWARD FACING Harness adjuster button located Under cover 1. Adjustable Headrest 7. Harness Adjuster Strap (Lower) 2. Shoulder Height Markers 8. EZ Buckle (If supplied) 3. Shoulder Pads (If supplied) 9. Seat Cover 4. Harness 10. Buckle Tongue Holders (If supplied) 5.
  • Page 49 CHILD SEAT FEATURES - FORWARD FACING ® ISOFLEX Connectors are stored on each side under the seat cover. 12. Vehicle's Anchor Fitting 20. Tension Indicator (Green when activated) 21. REARWARD FACING BELT PATH (Blue) 13. Attachment Clip 14. Top Tether Adjuster Strap ISOFLEX CONNECTORS ®...

  • Page 50: General Information

    SETUP - GENERAL INFORMATION FOR FORWARD FACING IS THERE ENOUGH ROOM ? To ensure that the space is sufficient, the 425mm purchaser should check the measurements FORWARD between the vehicle’s rear and front seats in FACING which the child restraint is intended to be used MEASUREMENTS for forward facing mode.

  • Page 51: Forward Facing Recline Positions

    SETUP - FORWARD FACING RECLINE POSITIONS Step 3. Reattach the flaps and press down the studs. Step 4. Set recline foot to forward facing mode by pulling the recline foot handle and rotating to the desired position and allow the foot to lock into place. Then Pull rotate...

  • Page 52: Installing Into Your Vehicle

    SETUP - INSTALLING INTO YOUR VEHICLE FOR FORWARD FACING INSTALLING INTO YOUR VEHICLE: Step 1. Choose vehicle seat position. Step 2. Ensure child seat is against vehicle seatback and top tether is not trapped behind seat. Place top tether and attachment clip over back of vehicle seat towards anchor fitting.
  • Page 53 SETUP - INSTALLING INTO YOUR VEHICLE FOR FORWARD FACING Step 3. Press harness adjuster button. Step 4. Place your hand under both shoulder harness straps, then pull shoulder Press harness straps to lengthen. Pull Step 5. Disengage buckle by pressing red button.

  • Page 54: Seatbelt For Forward Facing

    SETUP - SEATBELT FOR FORWARD FACING HOW TO INSTALL SEATBELT: Step 1. Lengthen vehicle seatbelt and feed vehicle seatbelt through yellow FORWARD FACING BELT PATH guide. ENSURE THE SEATBELT STRAPS ARE NOT TWISTED. Step 2. Feed the seatbelt across and out the opposite guide.
  • Page 55 SETUP - SEATBELT FOR FORWARD FACING Step 4. Engage the vehicle seatbelt buckle Engage buckle and tongue without twists. Step 5. Apply downward pressure onto the inner seat area and remove all the seat belt slack by pulling the seat belt from the buckle side across the child seat and back into the retractor.

  • Page 56: For Forward

    SETUP - ISOFLEX FOR FORWARD FACING ® Please ensure you have followed the steps on pages 50 - 53 HOW TO INSTALL USING ISOFLEX ® Step 1. Locate the ISOFIX Low Anchorages Locate the ISOFIX in the vehicle rear seat. If you cannot low anchors in the locate the ISOFIX anchorages, check vehicle rear seat.
  • Page 57 SETUP - ISOFLEX FOR FORWARD FACING ® Step 5. Connect the ISOFLEX connectors into ® each ISOFIX low anchorage. Give a firm tug on the connector to check it is securely fitted. Connectors may also show a green indicator on top.

  • Page 58: Top Tether For Forward Facing

    SETUP - TOP TETHER FOR FORWARD FACING HOW TO INSTALL THE TOP TETHER: Step 1. Press top tether adjuster button. Press Step 2. Lengthen top tether strap fully, ensure all unnecessary twists are removed. Pull Step 3. Place the top tether over the vehicle backseat, and if needed, remove the vehicle headrest.
  • Page 59 SETUP - TOP TETHER FOR FORWARD FACING Step 5. Ensure slack is removed from the top tether straps by pulling top tether adjuster strap. Do not over tighten as it may cause your child seat to lift. ALWAYS REMOVE SLACK IN THE TOP TETHER AND STORE STRAP.
  • Page 60 SETUP - TOP TETHER FOR FORWARD FACING CAUTION: CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP TETHER STRAP DAMAGED BY UNSECURED CARGO IN A COLLISION. SECURE OR REMOVE HAZARDOUS CARGO BEFORE USING THIS CHILD RESTRAINT. IMPORTANT: The top tether strap must be fitted at all times. Always secure the loose end of the top tether strap to prevent it hanging out of the car or being accessible by the child.

  • Page 61: Open Advanced Side Impact Cushion Technology

    SETUP - OPEN ADVANCED SIDE IMPACT CUSHION TECHNOLOGY FOR FORWARD FACING OPEN ADVANCED SIDE IMPACT CUSHION TECHNOLOGY: NOTE. The SICT™ system should not be used if the child seat is in the centre position. For further information on SICT™ refer to page 13.

  • Page 62: Headrest And Shoulder Harness

    SETUP - HEADREST AND SHOULDER HARNESS FOR FORWARD FACING HOW TO USE - HEADREST AND SHOULDER HARNESS: Step 1. Press harness adjuster button. Step 2. Place your hand under both shoulder Press harness straps, then pull shoulder harness straps to lengthen. Pull Step 3.
  • Page 63 SETUP - HEADREST AND SHOULDER HARNESS FOR FORWARD FACING Step 5. Place buckle tongues into buckle tongue holders. Step 6. Place child into child seat. Ensure your child sits fully back without slouching. Step 7. The shoulder straps must be in the slots which are nearest to the child’s Harness Straps shoulders, but not more than 25mm...
  • Page 64 SETUP - HEADREST AND SHOULDER HARNESS FOR FORWARD FACING Step 8. Engage Buckle ENSURE BUCKLE IS ALWAYS Tongue CONNECTED DURING USE. Buckle ENSURE ALL HARNESS STRAPS ARE NOT TWISTED. Shoulder Strap strap Step 9. Remove all slack from the lap strap area (including behind child's bottom), by pulling up on the shoulder straps.

  • Page 65: Remove Child From Child Seat

    SETUP - REMOVE CHILD SEAT FROM VEHICLE FOR FORWARD FACING SEATBELT REMOVING CHILD FROM CHILD SEAT: Step 1. Loosen shoulder harness straps by pressing the harness adjuster button. Pull Step 2. Pull both shoulder harness straps evenly. Press Step 3. Disengage buckle by pressing red button.

  • Page 66: Close Advanced Side Impact Cushion Technology

    SETUP - CLOSE ADVANCED SIDE IMPACT CUSHION TECHNOLOGY FOR FORWARD FACING CLOSE ADVANCED SIDE IMPACT CUSHION TECHNOLOGY: Step 1. Rotate clockwise to close. Instructions for Installation & Use...

  • Page 67: Remove Child Seat From Vehicle Seatbelt

    SETUP - REMOVE CHILD SEAT FROM VEHICLE FOR FORWARD FACING SEATBELT Please ensure you have followed the step 1 on page 66. HOW TO REMOVE SEAT FROM VEHICLE: Step 1. Press top tether adjuster button and Press Step 2. Lengthen top tether strap fully. Pull Step 3.
  • Page 68 SETUP - REMOVE CHILD SEAT FROM VEHICLE FOR FORWARD FACING SEATBELT Step 5. Lift open cover from the middle panel. Step 6. Remove vehicle seatbelt from yellow Forward Facing Belt Path. Replace middle cover. Instructions for Installation & Use...

  • Page 69: For Forward Facing Isoflex

    SETUP - REMOVE CHILD SEAT FROM VEHICLE FOR FORWARD FACING ISOFLEX ® Please ensure you have followed the step 1 on page 66. REMOVING CHILD SEAT FROM VEHICLE: Press Step 1. Press top tether adjuster button and Step 2. Lengthen top tether strap fully. Pull Step 3.
  • Page 70 SETUP - REMOVE CHILD SEAT FROM VEHICLE FOR FORWARD FACING ISOFLEX ® Step 6. Adjust the ISOFLEX strap to the ® shortest length and engage each ISOFLEX connector onto its storage ® pin. Step 7. Pull cover over ISOFLEX connectors ®...

  • Page 71: Care And Maintenance

    Ensure the buckle is free of fluff, liquid or other matter that may enter the buckle opening. Clean the buckle if it is difficult to engage. See next page. Immediate repair is required if any of the above issues are observed. Contact Britax ®...

  • Page 72: Clean Harness Buckle

    Click the 3-bar slide is fed through the same slots. If the harness buckle cannot be returned to its original working condition then contact Britax ® Customer Service for assistance. Instructions for Installation & Use...

  • Page 73: Remove Cover

    CARE AND MAINTENANCE - REMOVE COVER TO REMOVE COVER FOR WASH: NOTE: There is no need to disconnect the shoulder harness assembly straps from restraint. Step 1. Remove the restraint from vehicle. Step 2. Disengage the harness tongues from the harness buckle. Step 3.
  • Page 74 CARE AND MAINTENANCE - REMOVE COVER TO REMOVE COVER: Step 1. With the headrest lifted to the highest position, open the door at the back of the child seat. Step 2. Locate and unhook the elastic loops. Step 3. Recline child seat to reveal elastic loops at the lower front of the child seat and detach from hooks.
  • Page 75 CARE AND MAINTENANCE - REMOVE COVER Step 4. Unclip press studs from middle cover of child seat and crotch buckle. Step 5. Unhook the clip from the ® cover to reveal the ISOFLEX connectors. Instructions for Installation & Use...

  • Page 76: Replace Cover

    CARE AND MAINTENANCE - REPLACE COVER TO REPLACE COVER: Stretch the cover over the headrest and harness adjuster button. Ensure none of the harness straps are twisted. Step 1. Recline child seat to reveal hook at the lower front of the child seat and attach elastic loops.
  • Page 77 CARE AND MAINTENANCE - REPLACE COVER TO REPLACE COVER: Step 5. With the headrest lifted to the highest position, close the door at the back of the child seat. Make sure when closing the door, that the harness straps are not in the way of the clip when you are attaching the clip to the bar.
  • Page 78 ® COVERS AND ACCESSORIES THAT ARE DESIGNED AND TESTED FOR USE WITH THIS PRODUCT. VERY IMPORTANT: Only replace the cover with Britax supplied ® replacement cover with identical shoulder height markers or a replacement cover meeting AS/NZS 8005. Instructions for Installation & Use...

  • Page 79: Accessories

    Always follow the instructions covering the use of accessories provided with this child seat and the instructions provided with the accessory. If an aftermarket accessory is used that is not recommended by Britax , ensure that the ®...
  • Page 80 ACCESSORIES INFANT INSERTS (If supplied) For use until infant reaches the lower height marker (approx 18mth old) There are 3 types of infant inserts: Infant Insert Designed to provide additional support for smaller babies. Discontinue use at the lower height marker or when the insert is a tight fit or creates discomfort for larger babies.
  • Page 81 ACCESSORIES VEHICLE SEAT PROTECTOR (If supplied) Long Vehicle The Vehicle Seat Protector has been specifically Seat Protector designed to protect your vehicle seat when (If supplied) using your child seat. Place pocket on edge of seat, smooth back toward seat join ('A') and fit in any excess Vehicle Seat Protector into the join of the child seat ('A').

  • Page 82: Installation Of Vehicle Upper Anchor Point

    INSTALLATION OF VEHICLE UPPER ANCHOR POINT Consult the vehicle owner’s handbook for location of anchorage fittings or anchorage points and the possible use of spacers. Some vehicles may have an anchor fitting fitted by the vehicle manufacturer. If anchorage points cannot be found refer to car manufacturer or local child restraint fitting station or traffic authority for optimum position of upper anchorage point and the use of spacers.
  • Page 83 INSTALLATION OF VEHICLE UPPER ANCHOR POINT Extension Straps Length 300mm (Use Britax Safe-n-Sound part 0035 or 0291). ® Length 600mm (Use Britax Safe-n-Sound part 0036 or 0290). ® Available from all major child restraint retailers. 45° Measure distance from restraint upper anchorage attachment clip to the car anchor fitting.
  • Page 84 INSTALLATION OF VEHICLE UPPER ANCHOR POINT IF THE CAR IS FITTED WITH A CHILD RESTRAINT UPPER ANCHORAGE POINT UPPER ANCHORAGE FITTING Locate the upper anchorage point behind Fig.1. the rear seating position (Consult the car Attachment Bolt owners handbook for the location of the upper Lock washer anchorage point).
  • Page 85 INSTALLATION OF VEHICLE UPPER ANCHOR POINT For vehicles other than Sedans - In Australia, consult your nearest child restraint fitting station or traffic authority for vehicle inspection to find the best, correct position for the placement of the upper anchorage point, and for the correct attachment bolt length and use of spacers.
  • Page 86 INSTALLATION OF VEHICLE UPPER ANCHOR POINT CAR INSTALLATION ACCESSORIES (From retailers of Britax Safe-n-Sound products) ® EXTRA ANCHOR KITS: Available for using the restraint in additional cars. Re-order no: 0038 or 0289 EXTENSION STRAPS: May be required for cars without a fixed parcel shelf.

  • Page 87: In Case Of Accident

    Refer to the Britax crash exchange website for more ® details. Our Crash Exchange Terms and Application form are accessible on our website. Please visit britax.com.au for further information. Instructions for Installation & Use...
  • Page 88 IN CASE OF ACCIDENT NOTICE TO INSURANCE COMPANY CHILD RESTRAINT INVOLVED IN AN ACCIDENT All Britax Safe-n-Sound child restraints are manufactured to Australian/New Zealand ® Standards AS/NZS1754-2013 which require us to advise users of child restraints to "Destroy the entire restraint if it has been in use in a severe crash, even if no damage is obvious". The joint Australian/New Zealand Standards committee CS/85, advise that this statement applies whether a child was in the child restraint or not.
  • Page 89 NOTES Instructions for Installation & Use...
  • Page 90 NOTES Instructions for Installation & Use...
  • Page 91 NOTES Instructions for Installation & Use...

  • Page 92: Warranty

    You are also entitled to have the goods repaired or replaced if the goods fail to be acceptable quality and the failure does not amount to a major failure. For the full terms of the Warranty refer to the Britax website www.britax.com.au/service-support/warranty ®...

Table of Contents