Rear Terminal; Remote Control - Sanyo PLC-XU110 Owner's Manual

Sanyo multimedia projector owner's manual plc-xu110
Hide thumbs Also See for PLC-XU110:
Table of Contents

Advertisement

Rear Terminal

q
w
q R/C JACK
When using the wired remote control, connect the
wired remote control to this jack with a remote
control cable (not supplied).
w USB (Series B)
In order to operate the computer with the remote
control and use the PAGE
remote control during a presentation, connect the
USB port of the computer to the USB terminal with
a USB cable (not supplied) (pp.13, 19).
e SERVICE PORT
This jack is used to service the projector.
r COMPUTER IN 2/COMPONENT IN
Connect the computer or component video (or RGB
Scart) output signal to this terminal (pp.19, 21).
Use the supplied VGA cable or a Component-VGA
cable commercially available.
t MONITOR OUT
This terminal can be used to output the incoming
signal from COMPUTER IN 2/COMPONENT IN
terminal to the other monitor (p.19).
y COMPUTER IN 1/DVI-I
Connect computer output (Digital/Analog DVI-I
type) to this terminal (p.19).
u LAN Connection Terminal
Connect the LAN cable (refer to the owner's manual
"Network Set-up and Operation").
e
r
i
o
ed
buttons on the
Part Names and Functions
t
y
!0
!1
!2
!3
i ALARM buttons
Use these buttons when setting up the Alarm
function (pp.58–59).
o VIDEO IN
Connect the composite video output signal to this
jack (p.20).
!0 AUDIO IN
Connect the audio output signal from video
equipment connected to o or !3 to this jack. For a
mono audio signal (a single audio jack), connect it
to the L (MONO) jack (p.20).
!1 COMPUTER/COMPONENT AUDIO IN
Connect the audio output (stereo) signal from a
computer or video equipment connected to r or
y to this jack (pp.19, 21).
!2 AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack
(pp.19–21).
This terminal outputs sound from AUDIO IN terminal
(!0 or !1 ) .
!3 S-VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.20).
!4 USB (Series A)
Connect the supplied USB Wireless LAN Adapter or
optionally available USB memory for Memory
viewer operation (refer to the owner's manual
supplied with the optionally available USB memory).
u
!4
11

Advertisement

Table of Contents
loading

Table of Contents