Table of Contents
Advertisement
Remote Control
q
r
e
w
t
y
u
i
o
!0
!1
!2
!3
!4
!5
!6
To ensure safe operation, please
observe the following precautions:
– Do not bend, drop, or expose the remote
control to moisture or heat.
– For cleaning, use a soft dry cloth. Do not
apply benzene, thinner, splay, or any
chemical material.
q L-CLICK button
Act as the left mouse button for wireless mouse operation (p.15).
w ON/STAND-BY button
Turn the projector on or off (pp.22–23).
e WIRED REMOTE jack
Connect the remote control cable (not supplied) to this jack when using as a wired
remote control.
r SIGNAL EMISSION indicator
Lights red while the laser beam is being emitted from the laser light window or a
signal is being sent from the remote control to the projector.
t VIDEO button
Select the VIDEO input source (p.40).
y COMPUTER button
Select the COMPUTER input source (pp.30–31, 41).
u AUTO PC button
Automatically adjust the computer image to its optimum setting (pp.28, 33, 47).
i KEYSTONE button
Correct keystone distortion (pp.26, 48).
o Point
(VOLUME +/– ) buttons
ed 7 8
– Select an item or adjust the value in the On-Screen Menu (p.24).
– Pan the image in the Digital zoom + mode (p.39).
@5
– Adjust the volume level (Point
!0 MENU button
@4
Open or close the On-Screen Menu (p.24).
!1 FREEZE button
Freeze the picture on the screen (p.28).
!2 LASER button
– Operate the Laser pointer function. Laser beam is emitted while pressing this
button for one minute. When using this laser pointer for more than one minute,
release this button and press it again (p.14).
– Display the Pointer on the screen (p.14).
!3 PAGE
ed
buttons
@3
Scroll back and forth the pages on the screen when giving a presentation. To use
@2
these buttons, connect the projector and your computer with a USB cable (pp.11, 19)
!4 LAMP CONTROL button
@1
Select a lamp mode (pp.28, 53).
!5 D.ZOOM
ed
buttons
@0
Zoom in and out the images (pp.28, 39).
!6 RESET/ON/ALL-OFF switch
!9
When using the remote control, set this switch to "ON." Set it to "ALL OFF" for power
saving when it is not used. Slide this switch to "RESET" to initialize the remote control
!8
code or switch the Spotlight and Pointer to the Laser pointer function (pp.14–15).
!7 IMAGE button
!7
Select an image mode (pp.29, 36, 43).
!8 MUTE button
Mute the sound (p.27).
!9 P-TIMER button
Operate the P-timer function (p.29).
@0 NO SHOW button
Temporarily turn off the image on the screen (p.29).
@1 R-CLICK button
Act as the right mouse button for wireless mouse operation (p.15).
@2 SELECT button
– Execute the selected item (p.24).
– Expand or compress the image in the Digital zoom mode (p.39).
@3 PRESENTATION POINTER button
Move a pointer of the projector or a pointer for wireless mouse operation (pp.14–15).
@4 AUTO SET button
Correct vertical keystone distortion and adjust the PC display parameters (pp.26, 47).
@5 NETWORK button
Select the Network input or Memory viewer input. See the owner's manual "Network
Set-up and Operation" and owner's manual of Memory viewer (optionally available).
Part Names and Functions
7 8
buttons) (p.27).
13
Advertisement
Table of Contents
