Installing The Projector In Proper Directions - Sanyo PLC-XU110 Owner's Manual

Safety Instructions

Installing the Projector in Proper Directions

Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in
severe accident or fire hazard.
This projector can project the picture upward, downward, or backward, perpendicular to the plane of the screen
as shown in the figure below.
Bottom
Downward
(Usual)
Positioning Precautions
Avoid positioning the projector as described below when installing.
20˚
20˚
10˚ 10˚
10˚ 10˚
8
Front Bottom
Upward Upward
Do not tilt the projector more than 20 degrees from side to side.
Do not put the projector on either side to project an image.
In upward projection, do not tilt the projector over 10 degrees right and left.
In downward projection, do not tilt the projector over 10 degrees right and left.
Front
Downward