Remote Control Battery Installation
Open the battery
1
compartment lid.
To ensure safe operation, please observe the following precautions:
●Use two (2) AA or LR6 type alkaline batteries.
●Always replace batteries in sets.
●Do not use a new battery with a used battery.
●Avoid contact with water or liquid matter.
●Do not expose the remote control to moisture or heat.
●Do not drop the remote control.
●If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
●Risk of explosion if a battery is replaced by an incorrect type.
●Dispose of used batteries according to the instructions.
Operating Range
Point the remote control toward the projector
(Infrared Remote Receiver) when pressing
any button. See the right figures indicating
Maximum operating range for the remote
control.
Install new batteries into
2
the compartment.
Two AA size batteries
For correct polarity (+ and –),
be sure battery terminals are
in contact with pins in the
compartment.
Part Names and Functions
Replace the
3
compartment lid.
16.4'
(5 m)
16.4'
(5 m)
11.5'
(3.5 m)
1