Sanyo PLC WM5500L Owner's Manual page 62

Setting
Enter a PIN code
Use the Point ▲▼ buttons to enter a number. Press the Point ►
Enter a PIN code
button to fix the number and move the red frame pointer to the
next box. The number changes to . If you fixed an incorrect
number, use the Point ◄ button to move the pointer to the
number you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set.
Press the SELECT button so that you can start to operate the
projector.
If you entered an incorrect PIN code, PIN code and the number
() will turn red for a moment. Enter the correct PIN code
all over again.
Change the PIN code lock setting
Use the Point ▲▼ buttons to select Off, On 1 or On . Press the
SELECT button to close the dialog box.
Change the PIN code
PIN code change
The PIN code can be changed to your desired four-digit number.
Press the Point ▼ button to select PIN code change and press
the SELECT button. The Current PIN code dialog box appears.
Use the Point ▲▼ buttons to set the current PIN code. The
New PIN code dialog box appears. Set a new PIN code, the
confirmation box appears, and choose yes to set the new PIN
code.
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE DOWN
THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO .
MEMO ON PAGE 7, AND KEEP IT SECURELy . IF yOU
FORGET yOUR PIN CODE, THE PROjECTOR CAN NO
LONGER BE STARTED .
6