Sanyo PLC WM5500L Owner's Manual page 39

Reset
To reset the adjusted data, select Reset and press the SELECT
button. A confirmation box appears and then select yes. All
adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press the
Point ► or the SELECT button. Move the highlight to the Mode
that you want to clear and then press the SELECT button.
Store
To store the adjusted data, select Store and then press the Point
► or the SELECT button. Move the highlight to one of the Modes
1 to 10 in which you want to store, and then press the SELECT
button.
Note:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i , 1080i or 1080p is selected in the PC
System Menu (p.36).
• When input computer signal to the projector, PC adjust function
will become available.
Mode free
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Values of Total dots, Position H,
Position V, Display area H and
Display area V.
Store
Store
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Press the MENU button
to close this dialog box.
Computer Input
This mode has stored
parameters.
Where to free?
Total dots 1344
0
Position H 255
Position V 0 34
Display area H 1024
Display area V 768
Press the SELECT
button to clear the
stored data.
Vacant
Where to store?
store?
Free
Total dots
Total dots 1344
Position H 0
Position H 255 0
0
Position V
Position V 0 34
Display area H
Display area H 1024
Display area V
Display area V 768
Press the SELECT button to
store the data.
9