Image Adjustment - Sanyo PLC WM5500L Owner's Manual

1
Press the MENU button to display the On-Screen Menu. Use
the Point ▲▼ buttons to select Image adjust and then press
the Point ► or the SELECT button.
 Use the Point ▲▼ buttons select the desired item and then
press the SELECT button to display the adjustment dialog
box. Use the Point ◄► buttons to adjust the setting value.
Contrast
Press the Point ◄ button to decrease the contrast; press the Point
► button to increase the contrast (from 0 to 63).
Brightness
Press the Point ◄ button to decrease the brightness; press the
Point ► button to increase the brightness (from 0 to 63).
Color
Press the Point ◄ button decrease the intensity of the color; press
the Point ►button increase the intensity of the color (from 0 to 63).
Tint
Press the Point ◄► buttons to adjust the tint value to get a proper
color balance (from 0 to 63).
Color temp .
Use the Point ◄► buttons to select the desired Color temp. level
(XLow, Low, Mid or High).
White balance (Red)
Press the Point ◄ button to lighten red tone; press the Point ►
button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point ◄ button to lighten green tone; press the Point ►
button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point ◄ button to lighten blue tone; press the Point ►
button to deepen blue tone (from 0 to 63).
Note:
• When White balance Red, Green or Blue is adjusted, the Color temp. level will change to Adj..
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.45).

Image Adjustment

Image adjust Menu
Video Input
Contrast
Brightness
Color
Tint
Color temp.
Red
Green
Blue
Offset
Sharpness
Gamma
Reset
Store
Selected Image mode
◄►
Use the Point
buttons to adjust the
setting value.
32
32
32
32
High
28
32
35
8
8
1/2
47