Computer Input; Computer System Selection - Sanyo PLC WM5500L Owner's Manual

Automatic Multi-Scan System
This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a
computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper
image without any additional settings. (Signal formats provided in this projector are shown on pages 82-83)
One of the following messages may appear when:
The projector cannot recognize the connected signal
Auto
conforming to the provided PC Systems. Auto is
displayed on the System Menu box and the Auto PC
adjustment function works to display proper images.
If the image is not projected properly, a manual
adjustment is required (pp.38-39).
There is no signal input from the computer. Check the
-----
connection between your computer and the projector.
(See "Troubleshooting" on pp.73-75.)
The preset system is manually adjusted in the PC
Mode 1
adjust Menu. The adjusted data can be stored in Mode
1-10 (pp.38-39).
PC Systems provided in this projector is chosen. The
SVGA 1
projector chooses a proper system provided in the
projector and displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
Press the MENU button to display the On-Screen Menu. Use
1
the Point ▲▼ buttons to select Input and then press the Point
► or the SELECT button.
Use the Point ▲▼ buttons to select Systerm and then press

the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select the desired system and

then press the SELECT button.
6

Computer Input

Computer System Selection

PC System Menu
The PC System Menu
Selected system is
displayed.
Customized Mode (1-10) set in
PC System Menu
the PC adjust Menu (pp.38-39).
Systems in this dialog box
can be selected.