Keystone Correction - Sanyo PLC WM5500L Owner's Manual

If a projected picture still has keystone distortion after pressing the
AUTO PC button on the remote control, correct the image manually
as follows:
Press the KEYSTONE button on the remote control to switch the
Standard (for Vertical/Horizontal) /Corner correction adjustment.
The Standard or Corner correction adjustment dialog box appears.
Use the Point ▲▼◄► buttons to correct the Standard or Corner
distortion. The Standard or Corner correction adjustment can be
stored (see pages 44, 50).
Standard
Reduce the lower width
▼
with the Point button.
Reduce the right part
►
with Point button.
Corner correction
Press the KEYSTONE button on the remote control to switch
Corner correction adjustment, press the SELECT button on the
remote control to select the corner you want to adjust.
Reduce the top left corner part
►▼
with the Point buttons.
Keystone
Press the SELECT
button
Keystone
Reduce the bottom left corner
►▲
part with the Point buttons.

Keystone Correction

Reduce the upper width
▲
with the Point
Reduce the left part with
◄
Point button.
Reduce the top right corner part
◄▼
with the Point buttons.
Press the SELECT
button
Keystone
Press the SELECT
button
Press the SELECT
button
Keystone
Reduce the bottom right corner
◄▲
part with the Point
Remote Control
button.
Note:
• The white arrows indicate that there is no correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press and hold the KEYSTONE button for
more than 3 seconds while the Standard or Corner
correction dialog box is being displayed, the
Standard or Corner correction adjustment will be
released.
• The Corner pattern can be set to Off, Red, White or
Blue in the Corner pattern function. See "Keystone"
on pages 44, 50.
• The adjustable range is limited depending on the
input signal.
• Standard and Corner correction functions cannot
be adjusted at the same time. If one of the fuctions
is adjusted, and then the other one will be reset
automatically.
The top left corner adjustment as an example:
Keystone
buttons.
Basic Operation
POINT ▲▼◄►buttons
KEySTONE button
Press the Point ▼
button
Keystone
Press the Point ►
Keystone
button
1