Video Input; Video System Selection - Sanyo PLC HF15000L Owner's Manual

1
Press the MENU button to display the On-Screen Menu.
Use the Point ed buttons to select Input and then
press the Point 8 or the SELECT button.

Use the Point ed buttons to select System and then
press the Point or the SELECT button.
8

Use the Point ed buttons to select the desired system
and then press the SELECT button.
Video jack or S-video jack
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the
system manually.
PAL/SECAM/NTSC/NTSC4.4/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.4, PAL-M, and PAL-N.
y, Pb/Cb, Pr/Cr jacks
Auto
The projector automatically detects an incoming video signal,
and adjusts itself to optimize its performance.
When the Video System is 105i, 1080i or 1080p, select the
system manually.
y, Pb/Cb, Pr/Cr SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 70p, 105i, 1080i, and 1080p.
Note:
✔
The AV System Menu cannot be selected when selecting RGB
(Scart).

Video Input

Video System Selection

AV System menu (Video or S-video)
AV System menu (y, Pb/Cb, Pr/Cr)
47