Getting Started (Required Initial Setup); Initial Signal Connections; Digital (Dtv) Rf Antenna Connection; Analog Rf Antenna Connection - Sanyo PLV-65WHD1 Owner's Manual

GETTING STARTED (Required Initial Setup)

This LCD Projection Television will reproduce a crystal clear digital picture and exceptional sound.
The signal makes the difference!

INITIAL SIGNAL CONNECTIONS

1

Digital (DTV) RF Antenna Connection

• Connect an RF antenna to the "Digital Antenna In"
terminal.
The digital tuner in this LCD Projection TV receives HD
signals from an antenna. Digital signals from a set-top
box (STB) are received through the Component In jacks.
This LCD Projection TV can receive ANY resolution
being broadcast (HDTV, EDTV, or SDTV).

Analog RF Antenna Connection

• Connect a Cable signal (with or without a cable box),
Satellite Receiver, or RF antenna to the "UHF/VHF/
CATV" terminal.
PTV BACK
UHF/VHF/CATV
VCR BACK
IN
FROM ANT.
OUT
OUT TO TV
ANALOG CABLE
CATV FRANCHISE NOTE: Cable companies, like public
utilities, are franchised by local government authorities.
To receive cable programs, even with equipment which
is capable of receiving cable channels, the consumer
must subscribe to the cable company's service.
■
The LCD Projection TV will select the correct Antenna mode
for the type of Analog RF signal connected automatically.
■
Use "Analog Antenna Signal" in the Setup menu (see page
22) to change the Antenna Mode.
The analog tuner in this LCD Projection TV receives
Analog Antenna signals, Analog Cable signals, or the
RF output from a Satellite Receiver, VCR or cable box.
PTV BACK
UHF/VHF/CATV
OR
HDMI
VCR BACK
IN
FROM ANT.
OUT
OUT TO TV
ANALOG SATELLITE RECEIVER
CATV IN
CH3
CH4
VIDEO L- AUDIO -R
OUT TO TV S-VIDEO
VIDEO L- AUDIO -R
Notes:
If you do not have a VCR, connect signal directly to the 75 ohm
terminal (UHF/VHF/CATV).
Don't be fooled by the phrase "Available in High-Definition."
The only resolution available with any of these connections,
regardless of the original content, is standard analog (SDTV).
■
DIGITAL ANTENNA INPUT
DIGITAL
DIGITAL
AUDIO
ANTENNA IN
OUTPUT
PTV BACK
OR
DIGIT
AUDI
OUTP
IN FROM
SAT.
If you move the LCD Projection TV to a new location, press
the RESET key twice after connecting the signal and turning
on the LCD Projection TV. See RESET key description on
page 19.
DIGITAL RF
ANTENNA
PTV BACK
UHF/VHF/CATV
HDMI
VCR BACK
IN
FROM ANT.
OUT
OUT TO TV
ANALOG RF
ANTENNA
(Continued on next page.)
7