Front, Side, And Back Panels - Sanyo PLV-65WHD1 Owner's Manual

POWER
POWER
q
y
UHF/VHF/CATV
u
DIGITAL
AUDIO
HDMI
OUTPUT
q POWER indicator— A green light indicates the LCD
Projection TV is on; red light indicates the AC power
cord is connected, but the LCD Projection TV is in the
off condition.
w POWER key—Turn the LCD Projection TV on or off.
e Infrared Remote Receiver—Receives the signal from
the remote control.
r LAMP REPLACE indicator—A yellow light indicates
the lamp has reached the end- of-life. The lamp needs
to be replaced.
t WARNING indicator—A red light indicates the LCD
Projection TV detects an abnormal condition. A
flashing red light indicates that the internal
temperature of LCD Projection TV exceeds the normal
operating range.
y Analog Antenna Input (UHF/VHF/CATV)—Connect
an RF antenna or Analog cable system to this jack.
u HDMI (High Definition Multimedia Interface)
Input—Connect digital video equipment to this jack. It
takes only one high bandwidth cable (not supplied) to
communicate between audio/video equipment and
this LCD Projection TV. This connection is compatible
with DVI equipped devices. (Separate audio
connection and an adapter are required for a DVI
device.)
i DIGITAL AUDIO OUTPUT—Use an Optical Audio
cable to connect Digital Audio Output to an advanced
stereo home theater system equipped with Dolby®
Digital 5.1.

FRONT, SIDE, AND BACK PANELS

FRONT PANEL
LAMP
REPLACE
w e r
BACK PANEL
i o !0
SERVICE
DIGITAL
ANTENNA IN
WARNING
t
R-AUDIO-L Y–––––Pb–––––Pr
(MONO)
VIDEO
3
Y–––––Pb–––––Pr
AUDIO
OUTPUT VIDEO
2
S-VIDEO
WOOFER
VIDEO
1
!1 !2 !3
o DIGITAL ANTENNA IN—Connect an RF antenna to
this jack.
!0 SERVICE Jack—This jack is used to service the LCD
Projection TV.
!1 Analog AUDIO OUTPUT (L/R)—Connect external
audio equipment here.
!2 WOOFER—Connect external audio amplifier to this
jack. This jack outputs woofer sound from TV and the
audio input terminals.
!3 S-VIDEO Input (VIDEO1)—To enhance video detail,
use the S-Video jacks instead of the Video jacks, if
available on your external equipment. (S-Video
connection will override connection to the VIDEO
input jack [VIDEO1]).
!4 AUDIO/VIDEO Input (VIDEO1)—Connect analog
video equipment here.
Note: S-Video connection overrides the (VIDEO1)
composite video connection.
!5 Component Video Input (VIDEO2)—Connect digital
video equipment to the Y, Pb, Pr, and Audio L/R jacks.
These jacks will automatically detect the type of
signal being received.
!6 Component Video Input (VIDEO3)—Connect digital
video equipment to the Y, Pb, Pr, and Audio L/R jacks.
These jacks will automatically detect the type of
signal being received.
RIGHT SIDE PANEL
(See items 1, 8, & 17
on pages 18 & 19.)
INPUT key
VOLUME + – keys
CHANNEL + – keys
R-AUDIO-L
(MONO)
R-AUDIO-L
(MONO)
!6
R-AUDIO-L
(MONO)
VIDEO
!5
!4
INPUT
+
VOLUME
–
+
CHANNEL
–
11