Product Safety Features; Air Circulation; Cooling Fans; Handling Precautions - Sanyo PLV-65WHD1 Owner's Manual

Hd pro series wide screen lcd projection tv

Hide thumbs Also See for PLV-65WHD1:

Service manual (48 pages)

Service manual (53 pages)

Service manual (176 pages)

Table Of Contents

Table of Contents

AIR CIRCULATION

The openings in the cabinet are provided for ventilation.

To ensure reliable operation of the product and protect

it from overheating, these openings must not be

blocked or covered.

Hot air is exhausted from the exhaust vent. When

using or installing the LCD Projection TV, the following

precautions must be taken.

• Do not put any flammable object or spray can near

the LCD Projection TV. Hot air is exhausted from the

ventilation holes.

• Keep the exhaust vent at least 4" (10 cm) away from

any objects.

• Do not touch the periphery of the exhaust vent,

especially screws and metallic part. These areas will

become hot while the LCD Projection TV is in use.

COOLING FANS

Cooling fans are provided to cool the LCD Projection

TV. The fans' running speed is changed according to

the temperature inside the LCD Projection TV. When

the LCD Projection TV is cooled down enough, the fans

will stop running.

• Handle the LCD Projection TV carefully when installing.

Do not drop.

• Locate the set away from heat, excessive dust, and

direct sunlight.

• Do not push or hit the screen surface.

• Do not write, paint, or affix anything on the screen.

• Do not put anything on the LCD Projection TV.

• Throughout the installation process, handling by more

than two people is recommended.

• Never touch the projection screen directly with hands.

Doing so may affect the projection image quality.

For cleaning the LCD Projection TV, refer to "Cleaning

the LCD Projection TV" on page 30.

Note: Black dots or bright points of light (red, green, or blue)

may appear on the screen. This is a characteristic of the LCD

panels, not a malfunction of the LCD Projection TV.