Flatlock - Janome Air Thread 2000D Professional Instruction Manual

Machine Setting
Lower looper
pre-tension
setting slider
Standard setting Left
of tension dials needle
(1 needle 3
0-2
threads)
Standard setting Left
of tension dials needle
(1 needle 2
0-2
threads)
Spreader
(1 needle 2
threads)
Stitch length dial
Differential feed
dial
Chaining finger
switch knob
Upper knife
Use the left needle:
Needle
HA-1 SP No. 14 or No. 11
Needle thread Synthetic: No. 60 - 100
Left
needle
Upper looper
thread
Synthetic:
No.60-
100
Left
needle
Lower looper
thread
Synthetic:
No.60-
100
* Use the looper threading wire or a standard thread for
threading.
Fabric Medium weight
STD.
Right Upper Lower
needle looper looper
- 0
Right Upper Lower
needle looper looper
- -
3-4
1.0
S
Deactivated
Right Upper Lower
needle looper looper
Decorati Synthetic:
ve No.60-
thread 100
Right Upper Lower
needle looper looper
Decorati
ve
thread

Flatlock

NOTE:
• You may need to adjust the thread tension
depending on the type of fabric and thread being
used.
• If the tension balance on the test piece is not
satisfactory, you can adjust the thread tension with
the thread tension dial.
CAUTION
Make sure to turn the power switch off before
changing the needle, deactivating/activating the upper
knife or setting the chaining finger switch knob.
q Left needle thread tension dial
w Right needle thread tension dial
e Upper looper thread tension dial
r Lower looper thread tension dial
t Chaining finger switch knob
y Upper knife release knob
6-7
u Stitch length dial
i Differential feed dial
o Lower looper pre-tension setting slider
7
* Refer to page 10 for details on how to remove the
needle.
* Refer to page 11 for details on how to adjust the
stitch length.
* Refer to page 11 for details on how to adjust the
difference ratio.
* Refer to page 12 for details on how to deactivate/
activate the upper knife.
* Refer to page 13 for details on how to adjust the
chaining finger switch knob.
* Refer to page 18 for details on how to raise and
lower the spreader.
t
49
w e
r
q
y
u
i
o