Advanced Techniques Decorative Overedging - Janome Air Thread 2000D Professional Instruction Manual

Machine Setting
Lower looper
pre-tension
setting slider
Left
Standard setting
needle
of tension dials
5
Stitch length dial
Differential feed
dial
Chaining finger
switch knob
Upper knife
Use both the right and left needles:
Needle
HA-1 SP No. 14
Needle thread Synthetic: No. 60 - 80
Decorative thread
Upper looper
* Use the looper threading wire or a
thread
standard thread for threading.
Lower looper
Synthetic: No. 60 - 100
thread
Fabric Medium weight or heavy weight
STD.
Right Upper Lower
needle looper looper
5 1-2
3-4
1.0
S
Activated
ADVANCED TECHNIQUES
Decorative Overedging
NOTE:
• You may need to adjust the thread tension.
• For best results, gently pull the thread chain to the
back at the beginning and end of sewing.
CAUTION
Make sure to turn the power switch off before
changing the needle, deactivating/activating the upper
knife or setting the chaining finger switch knob.
q Left needle thread tension dial
w Right needle thread tension dial
e Upper looper thread tension dial
6
r Lower looper thread tension dial
t Chaining finger switch knob
y Upper knife release knob
u Stitch length dial
i Differential feed dial
o Lower looper pre-tension setting slider
* Refer to page 10 for details on how to remove the
needle.
* Refer to page 11 for details on how to adjust the
stitch length.
* Refer to page 11 for details on how to adjust the
difference ratio.
* Refer to page 12 for details on how to deactivate/
activate the upper knife.
* Refer to page 13 for details on how to adjust the
chaining finger switch knob.
t
46
e
w
r
q
y
u
i
o