Sewing Continuously; Using Guide Lines - Janome Air Thread 2000D Professional Instruction Manual

Sewing Continuously

Insert the next piece of the fabric under the toe of the
foot, and start sewing. You do not need to raise the
presser foot for ordinary fabric.
* For heavyweight fabric, raise the presser foot and insert
the fabric in front of the knife. Lower the foot and start
sewing while guiding the fabric.

Using Guide Lines

The guide lines on the top of the looper cover help you to
q
measure the distance from the right needle drop position.
The numbers on the top of the looper cover indicate the
distance from the right needle position in inches.
q 5/8˝ to the right of the right needle position
* The cutting width between the right needle position and
the upper knife when in the standard position (refer to
page 12) is 3.5 mm.
35