Table of Contents
Advertisement
10 OPTIONS
10.1 CONNECTIVITY OPTIONS
11
10
9
7 8
6
5
4
3
1
2
22
21
20
18 19
17
16
15
13
14
12
Modifications reserved
GE_UPS_OPM_TLE_SCE_M60_M80_1GB_V020.docx
Critical Power
Additional Customer Interface Board
The Customer Interface allows the client the exchange of
information (monitoring and control) with the following interfaces:
Connector RJ45 for a serial port RS232 / sub DB9 connection.
-
6 programmable output channels.
-
2 programmable input channels, of which one for GEN-ON.
-
EPO (Emergency Power Off).
-
3-ph SNMP/WEB plug-in adapter
SNMP - Simple Network Management Protocol
The 3-ph SNMP/WEB plug-in adapter is an interface to the Ethernet
Network, and provides UPS information via the standard SNMP
Protocol (UPS-MIB (RFC-1628); GE Single MIB; GE Parallel MIB).
The UPS can therefore be managed by a Network Management
System (NMS) or by our applications (for instance GE iUPSGuard or
GE Data Protection), which uses this information to determine the
state of the UPS in order to guarantee safe and orderly shut-
down of the server, when needed.
GE iUPSGuard
GE's iUPSGuard is a remote monitoring solution for UPS, providing
status monitoring and alarm notification that supports all GE UPS
product lines, anytime, anywhere.
iUPSGuard provides current and detailed information about UPS
operation, including its configuration, internal alarms and
operating conditions over web.
iUPSGuard notifies personnel of critical alarms and events via
email or SMS, allowing a user or GE technician to make timely
decisions on critical conditions.
In addition, comprehensive data collection and analysis improves
diagnostics capability and enhances response time.
Continuous monitoring and ongoing maintenance help ensure
maximum performance of your UPS equipment as it protects
business critical applications.
GE Data Protection
GE Data Protection software can communicate with the UPS over
RS-232, USB or SNMP to receive status information and
measurement values of the UPS. In case of a critical condition
(time on battery, remaining battery autonomy time or low battery)
for the Load, the software starts a controlled shut-down.
An enhanced alarm management system provides the possibility
to start applications, send messages, and send e-mails for every
upcoming or disappearing alarm.
Page 141/146
User Manual TLE Series 600 & 800 CE S1
Advertisement
Table of Contents
