HP EliteDesk 705 G4 Maintenance And Service Manual page 57

NOTE: 6-32 mounting screws can be purchased from HP.
If you are replacing a drive, transfer the mounting screws from the old drive to the new drive.
Install four silver-and-blue 6-32 mounting screws (two on each side of the drive).
●
● You can also install a 2.5-inch hard drive into a 3.5-inch drive bay using an adapter bracket similar
to the example shown below.
– Slide the 2.5-inch drive into the 3.5-inch adapter bracket.
Drives 47