Physical Specifications; Material Selection; Housing And Closure; A.3 Physical Specifications - Emerson Rosemount 5400 Series Reference Manual

Reference Manual
00809-0100-4026, Rev HA
A.3

Physical specifications

A.3.1

Material selection

Emerson provides a variety of Rosemount product with various product options and
configurations including materials of construction that can be expected to perform well in a
wide range of applications. The Rosemount product information presented is intended as a
guide for the purchaser to make an appropriate selection for the application. It is the purchaser's
sole responsibility to make a careful analysis of all process parameters (such as all chemical
components, temperature, pressure, flow rate, abrasives, contaminants, etc.), when specifying
product, materials, options and components for the particular application. Emerson Process
Management is not in a position to evaluate or guarantee the compatibility of the process fluid
or other process parameters with the product, options, configuration or materials of
construction selected.
A.3.2

Housing and closure

Product
Rosemount 5400 Series, Non-Contacting Radar
Type
Dual compartment (terminal compartment and the electronics are completely separated). Two
entries for conduit or cable connections. The transmitter housing can be rotated in any
direction.
Electrical connection
½ - 14 NPT for cable glands or conduit entries. Optional: M20 x 1.5 conduit / cable adapter, M12
4-pin male eurofast
output cabling is twisted shielded pairs, 18-12 AWG.
Housing material
Polyurethane-covered Aluminum, or Stainless Steel Grade CF8M (ASTM A743)
Ingress protection
Type 4X, IP66, IP67
Factory sealed
Yes
Weight
„
„
Reference Data
®
connector or A size Mini 4-pin male minifast
Aluminum transmitter head: 4.4 lb (2 kg)
Stainless steel transmitter head: 10.8 lb (4.9 kg)
Appendix A: Reference data
November 2014
®
connector. Recommended
195