Replacing The Maintenance Part; Fuser Unit - Samsung ProXpress M453x series Service Manual

3.2. Replacing the maintenance part

3.2.1. Fuser Unit

1. Turn the machine off.
2. Open the rear cover.
3. While opening the rear cover at a 45° angle, lift up the
right side of the rear cover, Then take off the rear cover.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
4. Remove 4 screws.
5. Lift up both levers. Then release the fuser unit.
CAUTION
The fuser area is hot. Take care when removing
paper from the machine.
3. Disassembly and Reassembly
3-3