Samsung ProXpress M453x series Service Manual page 184

Mono laser printer
Table of Contents

Advertisement

4. Troubleshooting
► Error Code
S2–4310
► Error message
Rear door is open. Close the door
► Symptom
Rear cover is opened.
► Troubleshooting method
1) Open the rear cover and close it correctly.
2) Open the rear cover.
3) Check if the switch contact of the rear cover is deformed.
4) Remove the left cover.
5) Check the connection between the cover open sensor and HVPS board. Reconnect the harness. If the harness
is defective, replace it.
6) Open the rear cover. Check if the message is changed when pushing the micro switch(cover open sensor).
7) If the cover open sensor is defective, replace it.
4-89
Copyright© 1995-2017 SAMSUNG. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-m4530ndSl-m4530nx

Table of Contents