ABB C1300 User Manual page 24

C1300
Advanced circular chart recorder
22
Totalizers Display
Note. Displayed only if the totalizer software option is enabled by installation of the appropriate
software key.
Select the style of totalizer display required in the Operating Page – see Sections 2.3.6 to 2.3.10.
Off
– totalizer values are not displayed in the Operating Page
Separate
– totalizer values for totalizers assigned to channels 1 and 2 are
Rate with Total
– totalizer values for totalizers assigned to channels 1 and 2, together
Total with Rate
– the current measured values for channels 1 and 2, together with
Dual Total
– totalizer values for totalizers assigned to channels 1 and 2 are
Dual + Flow Rate – totalizer values for totalizers assigned to channels 1 and 2, together
Note. Do not select Dual + Flow Rate if a totalizer is not assigned to each of the channels to
be displayed – see Section 3.7, page 35.
Other Channels Display
Select YES to display information for input channels not assigned to pens.
Alarm Adjust
Select YES to enable alarm set point adjustment in the Operating Page – see Section 2.6, page
18.
Continued on next page.
shown separately on display screen 1. Totalizer values for totalizers
assigned to channels 3 and 4 (3 and 4 pen recorders only) are
shown separately on display screen 2 – see Section 2.3.6, page 13
with the current measured values for channels 1 and 2, are shown
separately on display screen 1. Totalizer values for totalizers
assigned to channels 3 and 4 (3 and 4 pen recorders only),
together with the current measured values for channels 3 and 4,
are shown separately on display screen 2 – see Section 2.3.7, page
13
totalizer values for totalizers assigned to channels 1 and 2, are
shown separately on display screen 1. The current measured
values for channels 3 and 4 (3 and 4 pen recorders only), together
with totalizer values for totalizers assigned to channels 3 and 4, are
shown separately on display screen 2 – see Section 2.3.8, page 14
shown simultaneously on display screen 1. Totalizer values for
totalizers assigned to channels 3 and 4 (3 and 4 pen recorders only)
are shown simultaneously on display screen 2 – see Section 2.3.9,
page 14
with the current measured values for channels 1 and 2, are shown
simultaneously on display screen 1. Totalizer values for totalizers
assigned to channels 3 and 4 (3 and 4 pen recorders only),
together with the current measured values for channels 3 and 4,
are shown simultaneously on display screen 2 – see Section
2.3.10, page 15
3 Configuration
IM/C1300 Rev. J