Totalizer Display - Dual + Flow Rate; Data Logging - ABB C1300 User Manual

C1300
Advanced circular chart recorder
2.3.10 Totalizer Display – Dual + Flow Rate
The following screen is displayed only if Totals Display is set to Dual + Flow Rate (Section 3.4) and Tot X Source (where X is the
totalizer number) is set to anything other than None – see Section 3.7, page 35.

2.3.11 Data Logging

ˆ
IM/C1300 Rev. J
Totalizers 1 and 2
Measured value and measured value units.
Totalizer value.
Totalizer units and channel number.
Optional data logging hardware installed – see Section 2.3.11, below.
Optional data logging hardware not installed – see Section 2.3.3, page 10.
Data Logging Status
Provides information on current data logging status.
Press the key to place data logging off-line.
When data logging is off-line, the Compact Flash card can be removed safely.
If the card is not removed within 1 minute, data logging is placed on-line automatically. A timer
indicates the number of seconds remaining before data logging resumes.
This screen is displayed when a Compact Flash card is not inserted.
Data logging starts automatically when a Compact Flash card is inserted.
see Section 2.3.3, page 10.
2 Operation
15