Operating; Accessing The Operating - ABB C1300 User Manual

C1300
Advanced circular chart recorder
2.3 Operating Pages
Overview.

The following information is displayed in the Operating Pages:
– Input (pen) channel readings
– Data logging status (if data logging option is enabled by installation of the appropriate hardware)
– System time/date (if any one of the Totalizer, Math or Timers software options are enabled by installation of the
appropriate software key)
– Totalizer readings (if the totalizer software option is enabled by installation of the appropriate software key)
– Totalizer log (if the totalizer software option is enabled by installation of the appropriate software key)
– Totalizer control (if the totalizer software option is enabled and Totalizer Reset is set to YES – see Section 3.4, page 20.)
– Alarm set points (if Alarm Adjust is set to Yes – see Section 3.4, page 20.)

The Input (pen) channel and totalizer displays are configured separately (see Pen Ch Display and Totals Display in Section
3.4) and each can be displayed in one of several ways. Input channel information can be displayed without totalizer information
and vice-versa.

Input channel 1 and 2 information and system time/date is shown on display screen 1.

If the recorder is fitted with the optional second faceplate:
– Input channel 3 and 4 information, together with system time/date is shown on display screen 2
– Totalizer logs, totalizer control and alarm set point adjustment for pens 3 and 4 and associated totalizers are accessed
from the menu shown on display screen 2 when the

Totalizer information is shown on the same display screen as the pen to which the totalizer is assigned.

All channel and totalizer configuration is done using faceplate 1.
2.3.1 Accessing the Operating Pages
8
Press the key to open the Main Menu.
Highlight Operating Level.
see Section 2.3.3, page 10.
key is pressed on faceplate 2.
2 Operation
IM/C1300 Rev. J