Haier Z3000B User Manual page 27

Press and hold the "#" key to access the WAP menu.
Note: Hotkeys are unworkable under limited standby, but you can still use the "0" key to
change the display language.
You can select from eight hotkeys, i.e. 2 to 9, to set shortcuts. First select an unengaged
hotkey and then confirm by pressing the Enter key or the left softkey to access the function
list. When "Clear key" is selected, the shortcut will be cancelled.
From standby, press and hold any key from 2 to 9 to activate the shortcut. If no shortcut is set
for this key, the display will prompt "Set hotkey?" Confirm to access the function list to set the
hotkey as a shortcut.
Vocal control
This model supports vocal controlled dial and vocal control functions. After adequate training,
vocal control commands can be saved for different users. Under standby mode, you can
press and hold down key OK, and use vocal control commands to control the phone. Number
of vocal commands and vocal key control is as many as 40.
When you enter the vocal control menu, you will see a list of vocal control commands. (when
used for the first time, the list is empty.)
Add new vocal commands
Press the left softkey to enter the vocal command list. Select the item you want to set, and
enter the vocal command training process. Please follow the wizard and repeat the same
vocal command twice. When doing this, please try to make best match for the first and
second time you speak out the vocal command. If this has been successfully done, the vocal
command will be saved in the memory.
Options
Press the left softkey, you can perform the following operations:
* listen to the vocal command for one more time.
* Update
Update a certain vocal information. The operation is similar to the operation of adding
new commands.
* Delete
Delete the selected command.
3.4.4 Call settings
Minute beep
You can turn Minute Beep on or off. Accordingly, your phone will or will not notify you of the
th
50 second of each minute lapsed during a call.