Table of Contents
Advertisement
in the screen. You may delete the wrong code with the Clear key.
Press the left softkey or the Enter key to confirm what you have entered. If a right
code is entered, the phone will start searching for the network.
When the name of network you use is displayed, you can make or answer calls. Otherwise,
you need to register again.
Note: If you enter a wrong PIN code the third time, the SIM card will be locked. In this case,
you have to contact your SIM card supplier.
2.2 Turning the phone off
Press and hold the Power key to turn the phone off.
2.3 Placing a call
* To call a number, your phone must be turned on and have a network connection.
* Dial the phone number.
* Press the Send key to send the call, or access the Option menu to select Call or IP Call. The
Call function is same as that of the Send key. If IP Call is selected and an IP service provider
(e.g. 17951, the code of CMCC, who is a major IP service provider in China) code is preset in
the phonebook, the phone will make an IP call.
Ending a call
Press the right softkey or the Power key to end a call. Or just close the flip to end a call.
Placing an international call
From standby, press and hold the "*" key until "+" is displayed.
Enter the nation code.
Enter the region code and the phone number.
Press the Send key to send the call, or access the Option menu to select Call or IP Call.
Placing a new call with a call on hold
You can put the first call on hold and place a new call.
Press the right softkey to access the "In-call menu" and select Hold to put the first call
on hold, and then place a new call by use of phonebook dialing or dialing from the
keypad.
Press the left softkey or the Send key to dial the number.
Call switching (network dependent)
You can switch between two incoming calls, i.e. one being hold and the other active, by use
of "In-call menu".
2.4 Answering a call
Advertisement
Table of Contents
