Symbol Input - Haier Z3000B User Manual

Color screen gprs
Table of Contents

Advertisement

To answer an incoming call:
Press the left softkey or the Send key.
To refuse to answer an incoming call:
Press the right softkey or the Power key.
To answer the second call: (network dependent)
If call waiting is subscribed, when receiving the second call, the display will prompt you to:
Put the first call on hold and then answer the second one, or
Press the Power key to end the first call and then answer or refuse the second one.
2.5 Text entry methods
Your phone adopts the T9 entry system.
When using your mobile phone, you may need to input text from time to time, such as names,
QQ names, SMS and QQ text, organizer text, WAP text and names of modes, groups etc.
T9 English input:
Letter input: Press the key that contains the letter you want to input. Press once if
such letter is in the first position. Press twice to display the second letter, and so on,
until the desired letter is displayed.
Number input: You can enter numbers by use of number keys in your keypad.
Switching from one entry method to another
Press the "*" key to switch from one entry method to another in an editor. Press the "*" key
repeatedly to scroll through all entry methods.
Switching between capital letter and small letter
Press the "#" key briefly to switch between the capital letter and the corresponding small
letter.

Symbol input

From any input mode, press and hold the "#" key to access the symbol screen. Press the
number key according to the number leading the desired symbol. Press the Up/Down key to
access the next page of symbols.
Deleting input contents
When the input line is not empty, press the Clear key will delete the first letter/symbol from the
right until the input line is cleared. Press and hold the Clear key to delete the whole input line.
2.5.1 T9 English input
Press the keys that contain the letters of the desired word and the input line will show the

Advertisement

Table of Contents
loading

Table of Contents