Volume Setting Of Ta, Emergency Broadcast, And Pty - Clarion FX688A Owner's Manual

• Turning on PTY
1. Press the button to select the RDS Tab. The
tab controls will change accordingly.
2. Press the "Programme Type (PTY)", PTY stand-
by mode is turned on. When the selected PTY
broadcast starts, the display will change and the
PTY item name appears in the display.
• Turning off PTY
1. Press the button to select the RDS Tab. The
tab controls will change accordingly.
2. During PTY standby mode, press "Programme
Type (PTY)", PTY standby mode is cancelled.
• Cancelling PTY Interrupt
1. If you press the button while a PTY interrupt is
being received, the PTY interrupt is cancelled and
the unit returns to the PTY standby mode.
• Selecting PTY
1. Press the button to select the RDS Tab. The
tab controls will change accordingly.
2. During PTY standby mode, press "PTY List" to
enter the PTY Selection Menu. The left display will
change accordingly.
3. There are 29 PTY items that can be selected.
PTY Item
ENGLISH CONTENTS
News News
Current Affairs Current Affairs
Information Information
Sport Sports
Education Education
Drama Drama
Culture Culture
Science Science
Varied Variety
Pop Music Pop music
Rock Music Rock music
Easy Listening Easy listening music
Music
Light Classical Light music
Serious Classical Classics
Other Music Other music
Weather Weather
Finance Finance
Children's Pro- For children
grammes
Social Affairs Social affairs
Religion Religion
Phone In Phone In
Travel Travel
Leisure Leisure
12
Jazz Music Jazz
Country Country
National Music National music
Oldies Music Oldies
Folk Music Folk music
Documentary Documentaries
Searching for a PTY station
1. Press the button to select the RDS Tab. The
tab controls will change accordingly.
2. During PTY standby mode, Press "PTY Seek" to
search for a PTY broadcast in the direction of a
higher frequency.
* If no station with the selected PTY broadcast can
be received, the unit returns to the previous re-
ceiving station.
Volume Setting of TA, Emergency Broadcast,
and PTY
The volume for TA, emergency broadcast, and PTY
interrupts can be set during their respective inter-
rupts.
* The factory default setting is "15"
During TA, emergency broadcast or PTY interrupt,
Press [VOLUME+] / [VOLUME-] to set the volume
to the desired level (0 to 40).
* When the interrupt ends, volume returns to the
level it had before interrupt.