Commissioning - Mira Orbis Installation And User Manual

Commissioning

If you are unsure how an electric shower works, please read through the User
Instructions section before continuing.
Note! The temperature display throughout this guide will depend upon inlet supply
conditions and product settings.
1.
Electrical supply is turned
off at the mains.
4.
Check for water leaks.
7.
Press the 'Low' button,
light on the button comes
on
2.
Turn control to full cold.
5.
Switch on the electrical
supply and press the
'Start/Stop' button
8.
0 - 5 Secs
Water will be at full force
and at a cool temperature
a s i n d i c a t e d b y t h e
temperature indicator.
16
3.
Turn the water supply
fully on.
6.
The temperature indicator
b e c o m e s i l l u m i n a t e d ,
showing time. Temperature
will be displayed after a few
seconds.
9.
Turn the control slowly.
Temperature remains cool
and flow is reduced
5 - 10 Secs