Smps Assembly And Switchgear Signal Cable Connection - Samsung 136S Installation Manual

.
Assembling the Product
3

3.9.6 SMPS Assembly and Switchgear Signal Cable Connection

The following steps are only for an SMPS Assembly Type A.
37. Connect the signal cable from the SMPS Assembly to Switchgear ―WIRE ASSY RACK TO SYSTEM.‖
Figure 3-94: CAN Signal Cable Connection from SMPS Assembly to Switchgear
4
2. Connect the SMPS Assembly TCP/IP Cable to the SMPS Assembly.
Figure 3-95: TCP/IP Cable Connection to SMPS Assembly
4
Not factory-provided. Must be provided by the installer or customer.
76 ET003222373 English 4/2018. Rev 0.0