3.4 Preparation Stage - Unpacking
Check the parts during unpacking:
3.5 Preparation Stage - Ground Wire and Tools
Ground wires for the racks must be provided by the installer. Installer-supplied ground wires must
meet the specifications below.
3.5.1 Ground Wires
Use ground wire that is #1AWG. The ground wire specifications are:
Table 3-1: Ground Wire Specifications
#1AWG or thicker
3.5.2 Ground Wire Fasteners
Specifications for the ground wire fastening screws are:
Table 3-2: Ground Wire Fastener Specification
Size
M12–30mm
3.5.3 Rack Fasteners (Anchors)
Specifications for the rack fastener screws for anchoring the rack frame to the floor are:
Table 3-3: Rack Fastener Specifications
Size
M16–L
(Bottom Anchor)
3.5.4 Multiple Rack Fasteners
Specifications for the rack fastener screws for installing multiple rack frames side-by-side are:
Table 3-4: Rack Fastener Specifications (Side by side)
Size
M10–25mm (Side)
1
Not provided. Must be provided by the installer or customer.
2
Not provided. Must be provided by the installer or customer.
3
Not provided. Must be provided by the installer or customer.
ET003222373
English 4/2018. Rev 0.0
1
Wire No.
2
Hardness
70 (Grade 7)
3
Hardness
70 (Grade 7)
Hardness
70 (Grade 7)
3
Terminal Type
M12 2 Hole Ring Terminal
Thread Pitch
1.25 mm (0.05 in)
Thread Pitch
2.0 mm (0.08 in)
Thread Pitch
1.5 mm (0.06 in)
.
Assembling the Product
Material
SS304
Material
SS304
Material
SS304
11