PAN1322-SPP
ENW89841A3KF
Assembly Guidelines
If possible place PAN1322 in the
center of main PCB.
8.7
min. 15mm
min. 15mm
5.00
Restricted Area
No copper any layer
Top View
PAN1322
All dimensions are in mm.
Use a Ground plane in the area surrounding
the PAN1322 module wherever possible.
Figure 14
Cutout Drawing
In order to preserve the characteristics of the embedded antenna, a cutout must be respected under the antenna
through all metal layers of the PCB, as shown in drawing
Figure
14.
Placing the module inside a metal housing or close to metal parts like fasteners, shielding cages, washers, etc.
can significantly affect the antenna characteristics.
User's Manual
38
Revision 1.3, 2013-08-14
Hardware Description