min. 15mm
Figure 10
Cutout Drawing
Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory
questions and to have their complete product tested and approved for FCC compliance.
9.4
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference
User's Manual
Hardware Description
If possible place PAN1322 in the
center of main PCB.
No copper any layer
PAN1322
All dimensions are in mm.
Use a Ground plane in the area surrounding
the PAN1322 module wherever possible.
Bluetooth Qualification and Regulatory Certification
8.7
5.00
Restricted Area
Top View
33
PAN1322-SPP
ENW89841A3KF
min. 15mm
Revision 1.3, 2013-08-14